-Powered by ultra-compact (50x25mm) Open-Q 610 µSOM
-Open-frame Mini-ITX Form-factor carrier board for evaluation and development
-Ethernet, 2x USB, µSD socket, GPIO, sensor board
-Optional LCD/touchscreen and cameras
-Wi-Fi / Bluetooth antenna on carrier board
-Yocto Linux™
Featured Products
- Production-ready SOM based on the powerful Qualcomm® SXR2130P
- Qualcomm® SXR2130P SoC built on 7nm technology
- Dimensions: 50mm x 29mm
- Android™ 10
Powered by the Open-Q™ 865XR SOM (Micro System on Module)
Octa-core 64-bit Kryo™ 585 CPU, Adreno™ 650 GPU & Hexagon™ DSP
Carrier board Mini-ITX 170mm x 170mm
Android™ 10
Wireless IoT Gateway for Medical Devices
Family:
Powered by the Qualcomm® Snapdragon™ SM8350P Processor
Octa-core 64-bit Kryo™ 680 CPU, Adreno™ 660 GPU & Hexagon™ 780 AI Processor
Main Board: 100 mm x 85 mm
Android™ 11
Industrial-grade high performance Wi-Fi, Bluetooth, and Ethernet connectivity with enterprise security
Family:
Industrial-grade high performance Wi-Fi and Ethernet connectivity with enterprise security
Family:
Industrial-grade high performance Wi-Fi, Bluetooth, and Ethernet connectivity with enterprise security
Family:
Secure, Industrial-grade 802.11ac Wi-Fi, Bluetooth, and Ethernet connectivity
Family:
Embedded Wired Ethernet Gateway
Connectivity:
Family:
Mission Critical Medical Device and Equipment Connectivity
Connectivity:
Family:
Secure desk/wall-mountable hybrid terminal / device servers
Connectivity:
Family:
The PremierWave Development Kit is designed to deliver a new dimension of Wi-Fi networking.
Family:
1-port serial to Ethernet device server
Connectivity:
Family:
1-port serial to Ethernet device server; industrial protocols
Connectivity:
Family:
Single Port serial to Ethernet device server with Modbus support
Connectivity:
Family:
Industrial grade Wi-Fi module
Connectivity:
Family:
Products
A2200 GPS receiver with Small Footprint Solution, low power consumption and supporting SiRFstarIV technology
Family:
The A2235-H GPS receiver modules enable fastest acquisition and tracking with the latest SiRFstarIV technology.
Family:
A high-sensitivity concurrent GNSS receiver that integrates Qualcomm’s SiRFstarV technology.
Family:
A high-sensitivity concurrent GNSS antenna receiver that integrates Qualcomm’s SiRFstarV technology.
Family:
LMS RFID & Bluetooth LE development kit : sensors, gateway, connectivity and back-end platform to get you started in 1 clic,
Family:
The CCARD provides a near commercial-grade Telematics Control Unit (TCU) that provides high-speed (1Gbps) wide area networking (WAN) connectivity from an automobile.
Connectivity solution for your IoT project. Get one of our flexible data plan along with your Lantronix IoT device.
Connectivity:
Family:
Our IoT cellular platform simplifies connecting your global IoT fleet, on every network, using a single SIM.
Centralized Out of Band Management (OOBM) Software
The C-V2X Development Platform is intended for system testing and demonstration of V2V/V2I/V2P (vehicle to vehicle, vehicle to infrastructure, vehicle to pedestrian) and V2N (vehicle to network) functionalities. The V2N functionality is provided by the companion CCARD Platform (telematics control unit).
This product is no longer available"
Powered by the Open-Q™ 800 SOM (System on Module)
Quad-core Krait™, Adreno™ 330 GPU, Hexagon™ QDSP6
Carrier board 170mm X 170mm, SOM 82mm x 42mm
Android™ 4 Jelly Bean
Powered by the Open-Q™ 810 SOM (System on Module)
Octa-core ARM® Cortex® quad A57, quad A53,Adreno™ 430 GPU, Hexagon™ v5.5 DSP
Carrier board 170mm X 170mm, SOM 82mm x 42mm
Android™ 6 Marshmallow
Highly versatile, reliable and rugged cellular IoT router, with dual ethernet, dual sim Connectivity,
Rugged cellular IoT router supporting LTE, WAN, LAN, Wi-Fi, serial connectivity, PD-PoE and GNSS.
FOX3 is a compact, all-in-one cellular telematics device combining a rich connectivity choice with our powerful Edge intelligence.
Family:
Configure, provision, update and diagnose your Fleet of Lantronix Console Managers and IoT gateways at scale.
Compact and intelligent industrial modems, running our mPack software suite and available in 2G, 3G , dual mode LTE-M1 / NB-IoT, LTE cat. 1 and NB-IoT.
The future-proof M110 Series is suited perfectly to M2M / IoT applications facing tough environmental conditions and / or requiring a long lifespan.
Connectivity:
Family:
Powered by the Open-Q™ 835 µSOM (Micro System on Module).
Octa-core 64-bit Kryo™ CPU, Adreno™ 540 GPU & Hexagon™ DSP with Dual HVX
Carrier board Mini-ITX 170mm x 170mm
Android™ 8 Oreo™, Android™ 9 Pie
Powered by the Open-Q™ 2100 SOM (System on Module)
Quad-core ARM Cortex A7 up to 1.094GHz
Carrier board nano-ITX 120mm x 120mm, SOM 31.5mm x 15mm
Android™ 7 Customized for Wearable products
Production-ready SOM (System on Module) based on the Qualcomm® Snapdragon™ Wear 2100 processor
Quad-Core ARM Cortex A7 CPU, Adreno™ 304 GPU
Dimensions 15mm x 31.5mm
Android™ 7 Customized for Wearable products
Qualcomm® Snapdragon™ 212 (APQ8009)
Up to 8MP over 2-lane MIPI CSI
Wi-Fi 802.11b/g/n 2.4Ghz with chip antenna and U.FL connector
Qualcomm™ Fluence™ HD with Noise Cancellation
Powered by the Open-Q™ 212A SOM (System on Module)
Home Hub and Smart Audio Dev Platform
Carrier board 170mm x 115mm
Linux Home Hub OS
Production-ready, Pre-certified, SOM (System on Module) based on the Qualcomm® Snapdragon™ 212 processor
Quad-Core ARM Cortex A7 1.267GHz, Adreno™ 304 GPU, QDSP6 DSP
Dimensions 46.5mm x 50mm
Linux Home Hub OS
Powered by the Open-Q™ 2500 SOM (System on Module)
Quad-Core ARM Cortex A7 (32-bit) at 1.094GHz
Carrier board 170mm x 170mm,SOM 31.5mm x 15mm
Optimized Android™ for Wearables
Production-ready SOM (System on Module) based on the Qualcomm® Snapdragon™ 2500 processor
Quad-Core ARM Cortex A7 (32-bit) at 1.094GHz
Dimensions 15mm x 31.5mm
Android™ 8 Oreo™ for Wearables
Powered by the Open-Q™ 410 SOM (System on Module)
Quad-core 64-bit ARM® Cortex® A53, Adreno™ 306 GPU, Hexagon™ v5 DSP
Carrier board 130mm X 130mm, SOM 44mm x 26.5mm
Android™ 7 Nougat, Android™ 5 Lollipop, Windows™ 10 IoT Core, Linux®
Production-ready SOM (System on Module) based on the Qualcomm® Snapdragon™ 410 processor
Quad-core 64-bit ARM® Cortex®, Adreno™ 306 GPU & Hexagon™ v5 DSP
Dimensions 44mm x 26.5mm
Android™ 7 Nougat, Android™ 5 Lollipop, Windows 10 IoT Core, Linux®
Production-ready SBC based on the Qualcomm® QCS605 System-on-Chip
Octa-core Kryo™ 300 CPU, Adreno™ 615 GPU, Hexagon™ 685 DSP
50 x 68 mm product-ready form factor
Android™ 9 with Qualcomm® Vision Intelligence Platform
Powered by the Open-Q™ 624A SOM (System on Module)
Octa-Core 64-bit ARM® Cortex™ A53 1.8GHz
Carrier board 170mm x 115mm
Android™ 8 Oreo™
Production-ready SOM (System on Module) based on the Qualcomm® Snapdragon™ 624 processor
Octa-Core 64-bit ARM® Cortex® A53, Adreno™ 506 GPU, Hexagon™ 546 DSP
Dimensions 46.5mm x 50mm
Android™ 8 Oreo™
Production-ready µSOM (Micro System on Module) based on the Qualcomm® Snapdragon™ 626 processor
Octa-Core 64-bit ARM® Cortex® A53, Adreno™ 506 GPU, Hexagon™ 546 DSP
Dimensions 25mm x 50mm
Android™ 9, Android™ 10, Yocto Linux®
Powered by the Open-Q™ 626 µSOM (Micro System on Module)
Octa-Core 64-bit ARM® Cortex™ A53 2.2GHz CPU (APQ 8053Pro)
Carrier board 170mm x 170mm
Android™ 9, Android™ 10, Yocto Linux®
Production-ready µSOM (Micro System on Module) based on the Qualcomm® Snapdragon™ 660 processor
Octa-core 64-bit Kryo™ 260 CPU, Adreno™ 512 GPU & Hexagon™ 680 DSP
Dimensions 25mm x 50mm
Android™ 9 Pie
Powered by the Open-Q™ 660 µSOM (Micro System on Module)
Octa-core 64-bit Kryo™ 260 CPU, Adreno™ 512 GPU & Hexagon™ 680 DSP
Carrier board Mini-ITX 170mm x 170mm
Android™ 9 Pie
Powered by the Open-Q™ 820 SOM (System on Module)
Quad-core 64-bit Kryo™ CPU, Adreno™ 530 GPU & Hexagon™ 680 DSP with HVX
Carrier board 170mm X 170mm, SOM 82mm x 42mm
Android™ 7 Nougat, Android™ 8 Oreo™, Linux®, Android™ 9 Pie
See the Open-Q™ 820 SOM vs. Open-Q™ 820 µSOM selection guide here
Production-ready SOM (System on Module) based on the Qualcomm® Snapdragon™ 820 processor
Quad-core 64-bit Kryo™ CPU, Adreno™ 530 GPU & Hexagon™ 680 DSP with HVX
Dimensions 42mm x 82mm
Android™ 7 Nougat, Android™ 8 Oreo™, Linux, Android™ 9 Pie
Production-ready µSOM (Micro System on Module) based on the Qualcomm® Snapdragon™ 820 processor
Quad-core 64-bit Kryo™ CPU, Adreno™ 530 GPU & Hexagon™ 680 DSP with HVX
Dimensions 25mm x 50mm
Android™ 7 Nougat, Android™ 8 Oreo™ , Linux®, Android™ 9 Pie
Powered by the Open-Q™ 820 µSOM (Micro System on Module)
Quad-core 64-bit Kryo™ CPU, Adreno™ 530 GPU & Hexagon™ 680 DSP with HVX
Carrier board 170mm X 170mm, SOM 50mm x 25mm
Android™ 7 Nougat, Android™ 8 Oreo™, Linux®, Android™ 9 Pie
See the Open-Q™ 820 SOM vs. Open-Q™ 820 µSOM selection guide here
Production-ready µSOM based on long-life, higher-speed, Qualcomm® Snapdragon™ 820E (APQ8096SG) SoC
Quad-core 64-bit Kryo™ CPU @ 2.342 GHz, Adreno™ 530 GPU @ 652.8 MHz, Hexagon™ 680 DSP with HVX
Dimensions 25mm x 50mm
Android™ 9 Pie, Linux®
Powered by the Open-Q™ 820Pro µSOM (Micro System on Module)
Long-life, higher-speed, Qualcomm® Snapdragon™ 820E (APQ8096SG) SoC
Quad-core 64-bit Kryo™ CPU @ 2.342 GHz, Adreno™ 530 GPU @ 652.8 MHz, Hexagon™ 680 DSP with HVX
Carrier board 170mm X 170mm, SOM 50mm x 25mm
Android™ 9 Pie, Debian Linux®
Production-ready µSOM (Micro System on Module) based on the Qualcomm® Snapdragon™ 835 processor
Octa-core 64-bit Kryo™ CPU, Adreno™ 540 GPU & Hexagon™ DSP with dual HVX
Dimensions 25mm x 50mm
Android™ 8 Oreo™, Android™ 9 Pie
- Production-ready µSOM (Micro System on Module) based on the Qualcomm® Snapdragon™ 845 processor
- Octa-core 64-bit Kryo™ 385 CPU, Adreno™ 630 GPU & Hexagon™ 685 DSP with dual HVX51
- Dimensions 25mm x 50mm
- Android™ 9, Android™ 10, Yocto Linux®
Powered by the Open-Q™ 845 µSOM (Micro System on Module)
Octa-core 64-bit Kryo™ 385 CPU, Adreno™ 630 GPU & Hexagon™ 685 DSP
Carrier board Mini-ITX 170mm x 170mm
Android™ 9 Pie, Android™ 10, Yocto Linux®
Powered by the Open-X™ 8M SOM (System on Module)
NXP® i.MX 8M Quad-Core ARM® Cortex® A53 + single-core Cortex® M4F
Carrier board 170mm x 170mm, SOM 55mm x 35mm
Android™ 8 Oreo™, Linux®
Production-ready SOM (System on Module) based on the NXP® i.MX 8M processor
Quad-Core ARM® Cortex® A53 + single-core Cortex® M4F
Dimensions 35mm x 55mm
Android™ 8 Oreo™ , Linux®
Optional DIN-rail mount
Industrial-grade 3.5G Cellular IoT Device Gateway
Family:
The following two Qualcomm connected car platforms are for Tier 1 automotive partners who are developing, testing, and demonstrating cutting-edge connected car technology.
Drone and Robotics research and development
Consumer Drone products
Aerial Robotics
Land Robotics
Embedded vision and navigation applications
Advanced Modular Out-of-Band Console Manager
Connectivity:
Family:
Powered by the Qualcomm® Snapdragon™ 670 Processor
Octa-core 64-bit Kryo™ 360 CPU, Adreno™ 615 GPU & Hexagon™ 685 DSP
Mini-ITX form-factor — 170mm x 170mm
Android™ 8 Oreo™
- Powered by the Qualcomm® Snapdragon™ 845 Processor
- Octa-core 64-bit Kryo™ 385 CPU, Adreno™ 630 GPU & Hexagon™ 685 DSP
- Mini-ITX form-factor — 170mm x 170mm
- Android™ 9 Pie
Powered by the Qualcomm® Snapdragon™ 8150 Processor
Octa-core 64-bit Kryo™ 485 CPU, Adreno™ 640 GPU & Hexagon™ 690 DSP
Main Board: 100 mm x 85 mm
Android™ 9, Android™ 10
Powered by the Qualcomm® Snapdragon™ SM8250 Processor
Octa-core 64-bit Kryo™ 585 CPU, Adreno™ 650 GPU & Hexagon™ 698 DSP
Main Board: 100 mm x 85 mm
Android™ 10
Configure your Fox3 and Bolero40 with Workbench and replace old Hyper Terminal to send your AT/PFAL commands and use our devices. An easy to install PC software which allow you to visualize in a friendly Graphic User interface all your data from your tracker.
Connectivity:
Family:
Mobile Print Server - Print from your iPad or iPhone to Virtually Any Printer
Connectivity:
Family:
Available in 2G, 3G and LTE-M1, the BOLERO40 Series is a rugged IP 67 micro-tracker especially designed to match the vehicle tracking market.
Connectivity:
Family:
Com Port Redirector (CPR) is software that maps ‘virtual COM’ ports on a PC platform. It redirects application data destined to an attached device via the PC’s local serial (COM) port. Rather than going out the local port, the data is transmitted across the Ethernet network using TCP/IP. A device server attached to the network receives the data and transfers it from its own serial port to the attached equipment.
The Lantronix DeviceInstaller is a Windows-based GUI application that provides an easy way to install and configure specific Lantronix device server products.
Provides a robust development environment using industry standard Linux software tools combined with well known GNU toolchains
Family:
Rack-mount hybrid terminal / device servers
Connectivity:
Family:
Desk/wall-mountable hybrid terminal / device servers
Connectivity:
Family:
Evolution OS provides an unprecedented level of customization, control and security over ‘edge’ devices connected to the enterprise network.
The Evolution OS Software Developers Kit (SDK) provides the ability to create custom applications to run on the Evolution Operating System.
Family:
A Small Form Factor Out-Of-Band Solution
Connectivity:
Out-of-Band Management solution optimized for branch offices and remote sites!
Connectivity:
Family:
Integrated KVM-over-IP Solution for Remote Equipment
Connectivity:
Family:
Integrated KVM-over-IP Solution for Remote and Local Access to IT Equipment
Connectivity:
Family:
Serial to Ethernet device server with 256-bit AES
Connectivity:
Family:
The Evolution Software Developers Kit (SDK) provides the ability to create custom applications that run on the MatchPort AR and MatchPort b/g Pro using the Evolution Operating System.
Family:
Provides a robust development environment using industry standard Linux software tools combined with well known GNU toolchains
Family:
Connectivity:
Family:
SCPR is a Windows® application which creates a secure communications path over a network between the computer and electronic serial-based devices that are traditionally controlled via a COM Port.
1-port, serial to Ethernet device server with
256-bit AES
Connectivity:
Family:
2-port, serial to Ethernet device server; 256-bit AES
Connectivity:
Family:
xPico Wi-Fi Tower Module for Freescale Tower System w/xPico Wi-Fi Module (Freescale Tower System not included)
Family:
Connectivity:
Family:
The XPort / XPort Pro Evaluation Kit is designed with all the necessary items to help you successfully implement the XPort / XPort Pro / XPort Pro Lx6 into your product design.
Connectivity:
Family:
Flexible Linux development environment for the world’s smallest Linux networking server
Family:
DIN-rail mount form factor serial to Ethernet device server with industrial protocols
Connectivity:
Family:
DIN-rail mount form factor serial to Ethernet device server
Connectivity:
Family:
8 port Ethernet switch with optional fiber-optic interface
Family:
An Edge Solution for Branch Offices and Remote Sites
- Production-ready SOM (System on Module) based on the Qualcomm® QCS610 SoC
- Kryo™ 460 Octa-core CPU, Adreno™ 612 GPU, Hexagon™ DSP
- Dimensions 50mm x 25mm
- Yocto Linux connected camera SDK
Serial to Ethernet device server with 256-bit AES
Connectivity:
Family:
Board-level serial to Ethernet device server; RJ45 (10/100Base-T); 256-bit AES
Connectivity:
Family:
Network Enabled System On Module
Connectivity:
Family:
10Base-T/100Base-TX Ethernet; RS-232 / RS422 / RS-485
Connectivity:
Family:
Serial to Ethernet device server with 256-bit AES
Connectivity:
Family:
Device Server module for industrial automation applications
Connectivity:
Family:
Serial to Ethernet device server
Connectivity:
Family:
IPV6 ready, Linux networking module for M2M application development
Connectivity:
Family: