SGFEB Series

SGFEB Series

Stand-alone Gigabit Ethernet Media and Rate Converter
10/100/1000Base-T to 1000Base-SX/LX

SGFEB10xx-x3x-768x767
SGFEB Series
  • SGFEB10xx-x3x-768x767
  • SGFEB1040-330
  • SGFEB1040-230
  • SGFEB1040-130
  • SGFEB1039-130
  • SGFEB1024-130
  • SGFEB1019-130
  • SGFEB1014-130
  • SGFEB1013-130

The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber.

SGFEB Series

Application Spotlight

Fiber-to-the-Desk Application Note

Application Spotlight

Single Fiber Applications
See All Resources

Related Products

SGFEB Series Overview

Features

  • Auto Negotiation
  • Auto-MDI/MDIX
  • Link Pass Through
  • Far End Fault (FEF)
  • Remote Fault Detect
  • Provides rate conversion while also increasing transmission distances
  • Supports multimode or single mode fiber
  • Versions available with fixed SC or LC optics, as well as modular SFP optics
  • Long haul transmission distances are supported with a variety of SFP modules
  • SFP ports support dual speeds: 100/1000/SGMII
  • Multiport versions provide 3 or 4 port switch functionality or provide redundant fiber links
  • Supports IEEE 802.3az Energy Efficient Ethernet

SGFEB Series Tech Specs

    Standards

    • IEEE 802.3
    • IEEE 802.3ab
    • IEEE 802.3u
    • IEEE 802.3z
    • IEEE 802.3az

    Data Rate

    • Copper: 10/100/1000 Mbps
    • Fiber: 1000 Mbps, 100 Mbps also supported via SFP port

    Filtering Addresses

    • 8K MAC addresses

    Max Frame Size

    • 10,260 byte Jumbo Frames

    Dip Switch

    • Two Port Models
    • Switch 1: TP1 – Auto-Negotiation Enable / Disable
    • Switch 2: TP1 – Force 100Mbps or 10Mbps with switch 1 disabled
    • Switch 3: TP1 – Force Full or Half-Duplex with switch 1 disabled
    • Switch 4: Link Pass Through Enable / Disable
    • Switch 5 & 6: Controls the Fiber SFP port for 1000M, 100M, or SGMII Multiport Models with additional 4 position dip-switch
    • Switch 1 & 2: Controls the 2nd Fiber SFP port for 1000M, 100M, or SGMII
    • Switch 3 & 4: Fiber Redundancy Enable/Disable, Revertive Mode, and Fiber P2/P3 blocking

    Status LEDs

    • PWR (Power): On = Power is provided to converter
    • LACT (Fiber Link/Activity): On = Link, Blink = Activity
    • RJ-45 Upper Left (TPLink/Activity/Duplex): Green = Link Full-Duplex, Blink = Activity, Amber = Link Half-Duplex, Blink = Activity
    • RJ-45 Upper Right (Speed): Green = 1000Mbps, Amber = 100Mbps, Off = 10Mbps

    Dimensions

    • Width: 3.25” [82 mm]
    • Depth: 4.8” [122 mm]
    • Height: 1″ [25 mm]

    Power Consumption

    • 2.2 Watts

    Power Input

    • 7.5 to 24 VDC, Provided by wide input AC Wall Mount Adapter

    Environment

    • Operating: 0°C to 50°C
    • Storage: -15°C to 65° C
    • Humidity: 5% to 95% (non-condensing)
    • Altitude: 0 – 10,000 ft.

    Weight

    • 2 lbs. [0.90 kg]

    MTBF

    • Greater than 250,000 MIL-HDBK-217F Hours.
      Greater than 687,500 Bellcore Hours
    • When bundled with a typical 50,000 hour power supply:
      Greater than 41,660 MIL-HDBK-217F Hours
      Greater than 114,580 Bellcore Hours

    Certifications

    • EN55022 Class A, EN55024, FCC Class A, CE Mark
    • Safety: Wall Mounted Power Supply: UL Listed, UL60950 and CSA Certified

    Warranty

    • Lifetime

SGFEB Series Resources

Application Spotlights
Videos
Press Releases
Case Studies

SGFEB Series Downloads

Note: Some Documentation may have Transition Networks named or pictured. Transition Networks was acquired by Lantronix in August 2021. Learn more about the acquisition here.

Document Size
Stencil (ZIP 79.98 KB) 80 KB
SGFEB Series Datasheet (PDF 232.43 KB) 232 KB
Single Fiber Applications 248 KB
ION Media Conversion Platform 734 KB
User Guide Rev D (PDF 897.67 KB) 898 KB
Fiber-to-the-Desk Application Note 434 KB

SGFEB Series Part Numbers

SGFEB1040-130 SGFEB Series

10/100/1000Base-T (RJ-45) [100 m/328 ft.] to 100/1000Base-X SFP Slot (empty)
SGFEB1013-130 SGFEB Series

10/100/1000Base-T (RJ-45) [100 m/328 ft.] to 1000Base-SX 850nm multimode (SC )[62.5/125 um: 220 m/722 ft.] [50/125 um: 550 m/1804 ft.] Link Budget 7.5 dB
SGFEB1039-130 SGFEB Series

10/100/1000Base-T (RJ-45) [100 m/328 ft.] to 1000Base-SX 850nm multimode (LC [62.5/125 um: 220 m/722 ft.] [50/125 um: 550 m/1804 ft.] Link Budget 8.0 dB
SGFEB1014-130 SGFEB Series

10/100/1000Base-T (RJ-45) [100 m/328 ft.] to 1000Base-LX 1310nm single mode (SC)[10 km/6.2 mi.] Link Budget 10.5 dB
SGFEB1024-130 SGFEB Series

10/100/1000Base-T (RJ-45) [100 m/328ft.] to 1000Base-SX 1310nm Extended multimode (62.5/125mm fiber only) (SC) [up to 2 km] Link Budget 7.0 dB
SGFEB1019-130 SGFEB Series

10/100/1000Base-T (RJ-45) [100 m/328 ft.] to 1000Base-LX 1310nm single mode (LC) [10 km/6.2 mi.] Link Budget 10.5 dB
SGFEB1040-230 SGFEB Series

(1) Port 10/100/1000Base-T (RJ-45) [100 m/328 ft.] to (2) Ports 100/1000Base-X SFP Slot (empty)
SGFEB1040-330 SGFEB Series

(2) Port 10/100/1000Base-T (RJ-45) [100 m/328 ft.] to (2) Ports 100/1000Base-X SFP Slot (empty)
Lantronix Part # Name Description Order Now

Compatible Accessories

Lantronix Part # Legacy Part # Name Description Order Now
SFP Modules SFP Modules See Relevant SFP Modules
WMBD WMBD 5″ DIN Rail Mount Bracket
SPS-2460-SA SPS-2460-SA Stand-Alone Power Supply
E-MCR-05 E-MCR-05 12-Slot Media Converter Rack
RMS19-SA4-02 RMS19-SA4-02 4-Slot Media Converter Shelf
SPS-2460-PS SPS-2460-PS Piggy-Back Power Supply
WMBL WMBL 4″ Wall Mount Kit (long)