SPS-2460-SA

SPS-2460-SA

Stand-Alone Power Supply

SPS-2460-SA-New-540x540
  • SPS-2460-SA-New-540x540
  • SPS-2460-SA-Standing

Lantronix’ wide input external power supplies allow you to provide a wide range of input voltages to power your stand-alone converters and chassis. Input voltages of 24 – 60 VDC and 24 – 42 VRMS allow for installation of any of Lantronix’ stand-alone media converters in most industrial, telecom and commercial applications, as well as HVAC and building controlled environments.

Multiple form factors allow flexibility to meet your application. The stand-alone form factor can be used with all Lantronix’ stand-alone media converters. The piggy back form factor allows the power supply to attach directly to the converter and eliminate the power cable commonly found between the power supply and the converter. Once the piggy back supply is attached to the converter, the combined assembly is much easier to wall mount or attach to DIN Rail environments than using a separate supply.

SPS-2460-SA

Related Products

SPS-2460-SA Overview

SPS-2460-SA Tech Specs

    Power Output

    • Voltage: 12.25 VDC
    • Current: 1.0A
    • Load Regulation: ±5% at 10% load to full rated load
    • Noise and Ripple: ±40 mV peak-to-peak of output voltag

      Power Input

      • Voltage: 24 – 60 VDC; 24 – 42 VMRS
      • Efficiency: 80% (typical)

      Isolation Voltage

      • (Dielectric withstand) Meets IEC 950 for one minute
      • 1500 VAC: Output/Input
      • 1500 VAC: Input/Safety GND
      • 1500 VAC: Output/CASE

          Protection

          • Over Load Protection (OLP): When the average power rating exceeds 125%-150% of maximum power, output voltages
            reduced to a safe dissipation level
          • Protects against short circuit of any output
          • No Load Protection: No damage to power supply when operating at no load
          • Transient Protection: No voltage spike at power-on, power-off, or power failure

          Dimensions

          • Width: 3.75” [95 mm]
          • Depth: 3.1” [79 mm]
          • Height: 1″ [25 mm]

          Power Consumption

          • 3 Watts (max) @ 24 VDC input, 12.25 VDC output

          Environment

          • Operating: -20°C to 65°C
          • Storage: -40°C to 85°C
          • Humidity: 5% to 95% (non-condensing)
          • Altitude: 0 – 10,000 ft.

            Weight

            • 1 lb. [0.45 kg]

            MTBF

            • Greater than 250,000 hours (MIL-HDBK-217E)

              Certifications

              • CISPR/EN55022
              • Class A
              • FCC Class A

              Warranty

              • Lifetime

            SPS-2460-SA Resources

            Application Spotlights
            Videos
            Press Releases
            Case Studies

            SPS-2460-SA Downloads

            Note: Some Documentation may have Transition Networks named or pictured. Transition Networks was acquired by Lantronix in August 2021. Learn more about the acquisition here.

            Document Size
            SPS-2460-xx Datasheet (186.01 KB) 186 KB
            User Guide Rev B (PDF 602.90 KB) 603 KB

            SPS-2460-SA Part Numbers

            SPS-2460-SA SPS-2460-SA

            For use with all stand-alone media converters and some chassis
            Lantronix Part # Name Description Order Now

            Compatible Accessories

            Lantronix Part # Legacy Part # Name Description Order Now
            M/GE-PSW-SFP-01-UTX M/GE-UxX Series Mini Gigabit Ethernet Unidirectional Media Converter10/100/1000Base-T Port to 100/1000Base-X Port
            E-100BTX-FX-06(SFP) E-100BTX Series Stand-alone Fast Ethernet Media Converter 100Base-TX to 100Base-FX
            M/GE-T-SX-01 M/GE-T Series Mini Gigabit Ethernet Media Converter1000Base-T to 1000Base-SX/LX
            M/E-TX-FX-01 M/E-TX Series Mini Fast Ethernet Media Converter100Base-TX to 100Base-FX
            SFMFF1314-220 SFMFF1314-220 Stand-alone Fiber to Fiber Media Converter 1000Base-SX or 1000Base Fiber Channel
            SRS2F3111-100 SRS2F Series Stand-alone RS232 Remotely Managed Media Converter RS232 Copper to Fiber
            SGFEB1040-130 SGFEB Series Stand-alone Gigabit Ethernet Media and Rate Converter10/100/1000Base-T to 1000Base-SX/LX
            SGETF1013-110 SGETF Series Stand-alone Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX
            SBFTF1011-105 SBFTF Series Stand-alone Fast Ethernet Media and Rate Converter10/100Base-TX to 100Base-FX
            SBFTF1010-130 SBFTF1010-130 Stand-alone Fault-Tolerant Redundant Link Protector10/100Base-TX
            S6210-3013 S6210 Series Stand-alone DS3-T3/E3 Network Interface Device DS3 – T3/E3 Coax over Fiber
            E-100BTX-FX-05(HT) E-100BTX-HT Series Unmanaged Hardened Fast Ethernet Media Converter(1) 100Base-TX Port + (1) 100Base-FX Port
            E-TBT-FRL-05 E-TBT-FRL-05 Series Stand-alone Ethernet Media Converter10Base-T to 10Base-FL
            F-SM-MM-02 F-SM-MM-02 Stand-alone Fiber to Fiber Media ConverterFiber to Fiber for Data Rates from 100Mbps to 155Mbps
            S6120-1013 S6120 Series Stand-alone DS1 – T1/E1/J1 Network Interface Device 4 x DS1 – T1/E1/J1 + 10/100 Ethernet over Fiber
            S6110-1040 S6110-1040 Stand-alone DS1 – T1/E1/J1 Network Interface Device 4 x DS1 – T1/E1/J1 over Fiber
            M/GE-PSW-SX-01(ST) M/GE-PSW Series Mini Gigabit Ethernet Media Converter 10/100/1000Base-T to 1000Base-SX/LX
            M/E-PSW-FX-02 M/E-PSW Series Mini Fast Ethernet Media Converter 10/100Base-TX to 100Base-FX
            S6010-1011 S6010 Series Stand-alone DS1 – T1/E1 Remotely Managed NID DS1 – T1/E1 over Fiber
            J/RS232-CF-01(SC) J/RS232 Series Stand-alone RS232 Media ConverterRS232 Copper to Fiber