S6010 Series
Stand-alone DS1 – T1/E1 Remotely Managed NID
DS1 – T1/E1 over Fiber
The ION S6010 is a stand-alone managed media converter that offers a solution for extending DS1 – T1/E1 or PRI connections over fiber optic cabling. It provides fiber extension though a twisted pair RJ-48 port and a fiber port. These DS1 – T1/E1 converters must be used in pairs, one on each end of the fiber link. Management of the stand-alone converter is supported, in-band, over the fiber, when the remote S6010 is linked to a C6010 card installed in a managed ION Chassis. These DS1 – T1/E1 converters are available with fixed fiber connectors or an open SFP slot, with support for various fiber types, distances, and wavelengths to provide maximum flexibility for any network topology. CWDM SFPs can also be used to further increase the bandwidth capacity of the fiber infrastructure.
S6010 Series Overview
Features
- Remote in-band management
- Local or Remote Loopbacks – Copper or Fiber
- Switch selectable for T1 or E1
- Remote firmware upgrade
- LEDs for immediate visual status
- Supports dual or single fiber
- Supports multimode and single mode fiber at a variety of distances
- Supports CWDM SFPs
- SNMP management when used with ION chassis and management module
- Remote stand-alone can be managed by local peer
- Extend PRI over fiber
- Must be used in pairs
S6010 Series Tech Specs
Standards
- ANSI T1.102
- T1.402
- T1.408
- ITU I.431
- G.703
- G.736
- G.775
- G.823
- ETSI 300-166
- 300-233
- TBR12/12
Connectors
- Copper Connectors RJ-48, BNC
- Fiber Connectors SFP: LC connector Uses standard 100Base-X/OC-3
- SFP Fixed Optics: ST or SC connector
Data Rate
- T1 = 1.544 Mbit/s, E1 = 2.048 Mbit/s
Status LEDs
- Power, Signal Detect Copper, Signal Detect Fiber
Dimensions
- Width: 3.25” [82 mm]
- Depth: 6.5” [165 mm]
- Height: 1″ [25 mm]
Power Consumption
- 2.6 Watts
Power Input
- 100-240 VAC
Power Output
- 12 VDC
Environment
- Operating: -10°C to 65°C
- Humidity: 5% to 95% (non-condensing)
- Altitude: 0 – 10,000 ft.
Weight
- 2 lbs. [0.90 kg]
MTBF
- With Power Supply:
Greater than 41,660 hours (MIL-HDBD-217F)
Greater than 114,580 hours (Bellcore) - Without Power Supply:
Greater than 250,000 hours (MIL-HDBD-217F)
Greater than 687,000 hours (Bellcore)
Certifications
- CISPR/EN55022 Class A, FCC Class A, CE Mark, UL60950
Warranty
- Lifetime
S6010 Series Downloads
Note: Some Documentation may have Transition Networks named or pictured. Transition Networks was acquired by Lantronix in August 2021. Learn more about the acquisition here.
S6010 Series Part Numbers
| Lantronix Part # | Name | Description | Order Now |
|---|---|---|---|
| Sorry, no parts were found that match that search query. | |||
Lantronix Part # S6010-1011 |
Name S6010 Series |
Twisted Pair (RJ-48) [1.5 km/0.9 mi.] to 1300nm multimode (ST) [2 km/1.2 mi.] Link Budget: 11.0 dB |
Buy Now |
Lantronix Part # S6010-1013 |
Name S6010 Series |
Twisted Pair (RJ-48) [1.5 km/0.9 mi.] to 1300nm multimode (SC) [2 km/1.2 mi.] Link Budget: 12.0 dB |
Buy Now |
Lantronix Part # S6010-1014 |
Name S6010 Series |
Twisted Pair (RJ-48) [1.5 km/0.9 mi.] |
Buy Now |
Lantronix Part # S6010-1040 |
Name S6010 Series |
Twisted Pair (RJ-48) [1.5 km/0.9 mi.] to *SFP slot (empty) |
Buy Now |
| Compatible Accessories | |||
Lantronix Part # WMBL |
Name WMBL |
4″ [102 mm] Fits Stand-Alone Converters size 4.8″ [122 mm] and 6.5″ [165 mm] |
Buy Now |
Lantronix Part # E-MCR-05 |
Name E-MCR-05 |
12-Slot Media Converter Rack |
Buy Now |
Lantronix Part # RMS19-SA4-02 |
Name RMS19-SA4-02 |
4-Slot Media Converter Shelf, includes 4 brackets and 3 slot blanks |
Buy Now |
Lantronix Part # SPS-2460-SA |
Name SPS-2460-SA |
For use with all stand-alone media converters and some chassis |
Buy Now |
Lantronix Part # WMBD |
Name WMBD |
5″ [127 mm] DIN Rail Mount Bracket Fits all Stand-Alone Converters; 1- or 2-Slot ION Chassis |
Buy Now |
Lantronix Part # SFP Modules |
Name SFP Modules |
Buy Now | |
Complete the Solution
