S6210 Series
Stand-alone DS3-T3/E3 Network Interface Device
DS3 – T3/E3 Coax over Fiber

The ION S6210 is a managed stand-alone media converter that provides a solution for those users that need to extend DS3-T3/E3 connections over fiber. The S6210 is available in versions that support fixed fiber connectors as well as SFP fiber modules offering support for a variety of fiber types, distances, and wavelengths to provide maximum flexibility across a variety of network topologies. CWDM SFPs can also be utilized to further increase the bandwidth capacity of the fiber infrastructure.
The S6210 DS3-T3/E3 converters must be used in pairs. Management of the stand-alone converter is supported, in-band, over the fiber, when the remote S6210 is linked to a C6210 card installed in a managed ION chassis.
S6210 Series Overview
Features
- AIS (Alarm Indication Signal)
- Coax Line Build Out
- Switch selectable for DS3/T3 or E3
- Remote firmware upgrade
- Loopback – Coax and Fiber
- LEDs for immediate visual status
- Supports dual or single fiber
- Supports multimode and single mode fiber at a variety of distances
- Supports CWDM SFPs
- SNMP management when used with ION chassis and management module
- Remote stand-alone can be managed by local chassis card
- Must be used in pairs
S6210 Series Tech Specs
- ANSI
- ITU-TS
- ETSI
- G.823 for jitter tolerance
- G.755 for loss of signal
- Coax Connectors 75 ohm coax
- Fiber Connectors SFP: LC connector Uses standard 100Base-X/OC-3
- SFP Fixed Optics: ST or SC connector
- DS3/T3 = 44.7 Mbps; E3 = 34.4 Mbps
- Power, Coax link status, coax loopback status, AIS on coax link; Fiber link status, fiber loopback status, AIS on fiber link
- Width: 3.5” [82 mm]
- Depth: 6.5” [165 mm]
- Height: 1″ [25 mm]
- 2.4 Watts
- 100-240 VAC
- 12 VDC
- Operating: -10°C to +65°C
- Humidity: 5% to 95% (non-condensing)
- Altitude: 0 – 10,000 ft.
- 2 lbs. [0.90 kg]
- With Power Supply:
Greater than 41,660 hours (MIL-HDBD-217F)
Greater than 114,580 hours (Bellcore) - Without Power Supply:
Greater than 250,000 hours (MIL-HDBD-217F)
Greater than 687,000 hours (Bellcore) - CISPR/EN55022 Class A, FCC Class A, CE Mark, UL60950
- Lifetime
Standards
Connectors
Data Rate
Status LEDs
Dimensions
Power Consumption
Power Input
Power Output
Environment
Weight
MTBF
Certifications
Warranty
S6210 Series Downloads
Note: Some Documentation may have Transition Networks named or pictured. Transition Networks was acquired by Lantronix in August 2021. Learn more about the acquisition here.
Resources
Firmware Downloads
S6210 Series Firmware, Release Notes and MIBs |
S6210 Series Part Numbers
- Lantronix Worldwide Offices – Find an office in your region from our list of worldwide offices.
- Find a Lantronix Partner – Lantronix products are available from a variety of leading technology vendors.
*SFP port uses standard 100Base-x/oc-3 SFP
Compatible Accessories
Lantronix Part # | Legacy Part # | Name | Description | Order Now |
---|---|---|---|---|
SFP Modules | SFP Modules | See Relevant SFP Modules | ||
WMBD | WMBD | 5″ DIN Rail Mount Bracket | ||
SPS-2460-SA | SPS-2460-SA | Stand-Alone Power Supply | ||
E-MCR-05 | E-MCR-05 | 12-Slot Media Converter Rack | ||
RMS19-SA4-02 | RMS19-SA4-02 | 4-Slot Media Converter Shelf | ||
WMBL | WMBL | 4″ Wall Mount Kit (long) |