Home » Resources » Application Notes

Application Notes

Embedded Networking

xPico 200 Series – JTAG Programming

Using the ePack SDK

Integrating xPico 200 Series with Microsoft Azure

xPico 200 Series Layer 2 Wi-Fi to Ethernet Bridge

Configuring the SNMP Extended Agent for xPico 200 Series and XPort EDGE

Integrating xPico 200 Series with Microsoft Azure-release

Best Practices for IoT Device Security

Upgrading Python on a PremierWave 2050 or SGX 5150 family device

Using a Garmin® PND with a FALCOM FOX3-2G/3G/4G

How to use IOBOX-WLAN with a FOX3-3G/4G series device

Reading real-time data from digital tachograph with IOBOX-CAN and FOX3 series

xPico 200® Series Partition Size Changes

Updating the XPort EDGE® Bootloader

Updating the xPico 200® Bootloader

xPico 200® Certification Firmware Instructions Application Note

xPico 250 Bluetooth LE Application Note

XPort-485 Technical Application Note

Antenna Solutions for the WiPort

Differences in XPort 01 & 03 Reset Pin Characteristics

How to Connect a Lantronix Embedded Module to a Wired Ethernet Port

Connect Power over Ethernet to the WiPort / WiPort NR

XPort-AR Power over Ethernet

Demo programs for PremierWave EN and PremierWave XN

Related source code demos: PremierWave-Demos_source-code.zip

xPico Wi-Fi Tower Board Demos Application Note

Related source code demos: xPico-Wi-Fi_Tower-Board_Labs.zip

xPico Wi-Fi Shield Sample Programs

Related source code demos: xPico-Wi-Fi-Shield_Labs.zip

External Device Servers

Best Practices for IoT Device Security

Upgrading Python on a PremierWave 2050 or SGX 5150 family device

Recommended CAT5 Cable Assemblies

IT Management - Data Center

Using an LTE Gateway Cellular for Failover or Failback

A More Secure and Cost-Effective Replacement for Modems

IT Management - Distribute IT/Branch Office

The Lantronix Spider Network: A Guide to Maximizing Distributed KVM Installations

Lantronix Mobility Solutions

CAN Applications with AVL Devices

Using Lua Scripts for FOX3-2G/3G/4G and BOLERO40 Series App Note

Using the ePack SDK

CANopen Gateway Functions for AVL Devices

Best Practices for IoT Device Security

AppNote_Integrating_an_ELA_Reader_into_FOX3_and_FOX3-3G_Series_devices

Transform History Binary Data in NMEA Format for AVL Devices and STEPPII, MAMBO/2

Configuring the M113 Cellular Modem for Verizon Mode

CAN Applications with AVL Devices

ContiPressureCheck™ System Integration into FOX3-2G/3G/4G Series

NFC-Windscreen and NFC-InCar Readers

In-Vehicle Installation Guidelines for FOX3-2G/3G/4G and BOLERO40 Series

Eco-Drive-GPS Premium-Features in AVL Firmware 2.11.0 and Above Part Number

Activation of Premium-Features for FOX3-2G/3G/4G and BOLERO40 Series

Remote Firmware Update with Workbench Software

How to Use Bluetooth LE with the FOX3-3G-Bluetooth LE Device

ADVANCED ENCRYPTION STANDARD (AES_TCP) PREMIUM FEATURE in AVL firmware 2.10.0 and above

Use of I/OS on AVL Devices

FOX3 and FOX3-3G Device Integration with AgoraBee Reader

Getting Started with 1-Wire Devices

INDEX HISTORY PREMIUM-FEATURE in AVL firmware 2.10.0 and above

How to collect CAN FMS/J1939/OBD-II data with FOX3-2G/3G/4G Series

Connecting a bar code scanner to a STEPPII, STEPPIII, BOLERO-LT or FOX device

Improving Asset Tracking Through Untethered Dead Reckoning with FOX3-3G-DR

Garmin® PND Integration with FOX3-2G/3G/4G series

Communication of Passive RFID Reader and FOX3 Series Via Serial Link

Firmware WebUpdate for FALCOM AVL devices

Top

© Lantronix, Inc. 2022. All Rights Reserved.

scroll to top

By continuing to use the site, you agree to the use of cookies. more information