Hardware

• Cellular
  • LTE CAT 4 with 3G and, depending on the regional variant, 2G fall-back modes on industrial pack
  • LTE CA 13 (uplink) / 7 (downlink) with 3G fall-back mode on security pack
  • 5G, Sub-6 GHz with both LTE cat. 13 (uplink) / cat. 20 (downlink) and 3G fall-back modes
• Wi-Fi & Bluetooth Operation
  • 2T2R Wi-Fi 5; via an RP-SMA antenna connector
  • Bluetooth 5.1; via Wi-Fi’s rightmost RP-SMA antenna connector
  • Optional: 2T2R WiFi6/6E
• Ethernet
  • 10/100 base Ethernet: One LAN port and one WAN port, user-reconfigurable as second LAN port; via RJ-45 headers fitted with two LEDs
• PSE-PoE+
  • Security Pack Variant Only – 30 W per LAN port – requires U301 accessory
• Serial Communication
  • RS-232 Full implementation; via a 9-pin sub-D header
• USB
  • One (1) USB host port; via a Type-A header
• I/Os
  • I/OS (2) with common ground; via a 3-pin COMBICON header and a tool-less plug
    (provided)
  • User-configurable, each one independently from the other, as (i) analogue input; or (ii)
    analogue input suited to current loop (aka 4 mA ~ 20 mA) sensors; or (iii) digital output
  • INPUT: 0 V dc ~ 2.5 V dc -> ZERO; 3 V ~ 50 V dc -> ONE
  • OUTPUT: open collector; 200 mA max.; 50 V dc max.
• Dual SIM
  • Dual SIM / Single standby; via two **mechanically secure mini-SIM holders**
• Location Services & 3 Axis Accelerometer
  • Concurrent GPS and GLONASS IZat™ GPS Oner
  • Transport Pack Only – Qualcomm’s IZat gps One or u-blox’s M8; via a dedicated SMA
    Accelerometer from ST Microelectronics LIS331DLH
• Memory & Data Storage Security Chip
  • RAM
    DDR2 SDRAM 256MB
  • SPI Flash Memory
    8MB
  • User Data Storage
    Internal: via the 256 MB of parallel NAND Flash memory mentioned earlier
    External: via a user-accessible microSD card (not provided)
    Secure Element from MICROCHIP ATECC608 on security variant
• MFF SIM(s)
  • Combination of (i) ‘MFF + mini’; or (ii) ‘mini + MFF’; or (iii) ‘MFF + MFF’ SIMs, substituted
    for the standard two mini-SIM trays
• Physical Description
  • Brushed aluminum alloy
  • Size: (MM) 131.5 x 81.27 x 25 without
    connectors
  • Weight: approximately 300g
  • Operating Status LEDs: Nine as green for (i) POWER; blue for (ii) SIM; (iii) Wi-Fi; amber for (iv) Activity; (v) Network; (vi) Signal; yellow for user-programmable (vii) LED #1; (viii) LED #2; red for (ix) ALERT
• Temperature & Humidity Ranges
  • Operating: -30 °C ~ +70 °C; up to 95% RH
  • Storage: -40 °C ~ +85 °C; up to 95% RH
• CPU
  • ARM926EJ-S-based CPU running at 600 MHz
  • Built-in 32 KB instruction cache and 32KB data cache
• Power
  • Input voltage: 10.8 ~ 60 V DC
  • 3-pin Nano-Fit™ header
  • ISO 7637-2:2011-certified at 12V and 24V
  • ISO 7637-2:2004-certified at 12V and 24V
  • ISO 21848:2005-certified at 48V
  • Last Gasp: 100-second long, approximately. 2 96 mWh Li-ion batteries (not functional below -10 °C)
  • Digital Input (Ignition): One (1) digital input, on the third pin of the 3-pin header
  • Input: 0 V DC ~ 2.5 V DC => ZERO; 3 V DC ~ 50 V DC => ONE
  • Power off Timekeeping: Dedicated RTC with 100-day data retention period, approximately 15 mWh lithium manganese

Software Suite

• Administration & Network Protocols
  • Web-based user interface, setup wizard, console log viewer, save / load configuration, NTP, SMS / OTA remote configuration, TR-069-capable
• Redundancy
  • Ethernet, Cellular, Wi-Fi – configurable as failover or load balancing
• Resilience
  • Network connectivity watchdog (configurable), internal application watchdog
• Wi-Fi
  • Client or Access point (approx. 12 users), WEP, WPA, WPA-PSK / WPA2-PSK security modes
• Device Management Services
  • Lantronix ConsoleFlow platform or third-party platforms such as TrinitySMART, Thingworx, Thing+, Cumulocity, etc
• ePack SDK
  • Need to run your own program; G520 allow its user to create custom packages and Lantronix image builder to build custom firmware images.
• Performance & Fault Management
  • Real time processor load and interface (WAN / LAN / Wi-Fi), traffic analysis, ICMP, trace-route, NS lookup
• Routing
  • DHCP, static routing, port forwarding, traffic routing, static /dynamic DNS, DNS proxy, NAT, STP
• VPN & Tunneling Protocols
  • PPTP client, L2TP, OpenVPN client / server / passthrough, GRE, IPsec up to 4 channel
• Security
  • Zone-based firewall, VLAN, DMZ, HTTPS local and remote connection, SIM PIN
• Industrial Protocols
  • Following industry protocols supported on MH.
    • Ethercat
    • DLMS client
    • DNP3 Outstation
    • Modbus master
    • IEC104 slave and IEC 101 master

Resources

Stay Up to Date New

Industrial Gateways
G526GP12S	G526	Industry Pack LTE CAT 4 Router For EMEA, Asia Pacific
G526GP1AS	G526	Industry Pack LTE CAT 4 Router For Canada, USA
G526GP17S	G526	Industry Pack LTE CAT 4 Router For Japan, South Korea
G526GP1CS	G526	Industry Pack LTE CAT 4 Router For China, Thailand, Indonesia, India
Security Gateways
G527GP22S	G527	Security Pack LTE CAT 7-13 Router For EMEA, Asia Pacific;
G527GP22S	G527	Security Pack LTE CAT 7-13 Router For America;
G528GP2FS	G527	Security Pack 5g Sub 6ghz Worldwide
Essential Accessories
ACC-U301	POE+ POWER SUPPLY	75 W industrial power supply
ACC-520-0166-00		Power Supply, Wall Cube, 12vdc 12w, US, Level 6, With PSE, 1x3 3.0mm Latched Conn Output
ACC-520-0165-00		Power Supply, Wall Cube, 12vdc 12w, 4 AC Plugs, Level 6, With PSE, 1x3 3.0mm Latched Conn Output
ACC-500-0421-00	POWER CORD	KDC32 (provided) or KDC33 (with one more stripped wire for Ignition)
SC485	SNAP CAP Converte	38.2 mm-deep, 6 kV- (contact) or 8 kV- (air) ESD-protected, 1 kV-isolated, half- (factory setting) or full-duplex (user-configurable via a slide switch) RS-485 port
BR250	DIN RAIL CLIP	BR250 single mount 7½ U width
BR351	DIN RAIL CLIP	BR351 single mount 7½ U width
BR775	DIN RAIL CLIP:	BR775 dual mount 7¾ U / 1¾ U widths; doubles as a 4-hole mounting bracket
Lantronix Part #	Name	Description	Order Now