Highly versatile, reliable and rugged series of routers
With high-speed 3G or LTE, WAN, LAN, Wi-Fi and serial connectivity, the E220 is designed for mission-critical enterprise applications requiring faultless connectivity.
With high-speed LTE cellular, WAN, LAN and Wi-Fi connectivity, the E220 series of router are highly versatile, reliable and rugged router designed for mission-critical M2M and enterprise applications requiring faultless connectivity. Cellular can be configured to be the primary connectivity mode or the WAN failover alternative to a wire line connection. They also support a wide range of advanced routing protocols and VPN configurations.
Advanced Failover SolutionLantronix E220 has an automatic failover functionality that avoids you to lose communication anytime you have a connection problem. As soon as the cable connection is lost, communications will automatically failover on the cellular network (up to 150 Mbps): with E220 your business will, basically, never stops. |
|
VPNOpen VPN offers highest performance and is reliable on high latency connections and is easy to set up. With a 256-bit encryption protocol, your informations are safe. This platform offers improved stability and a great compatibility for all your devices. |
|
Load balancingAs a versatile and multi-connected device, Lantroix E220 let you set up the load you want for every single device connected to your router. If a crucial component for your business needs more bandwidth than the others in order to work properly, you can allocate more resources to this specific component in a matter of seconds |
|
OTA UpdatesLantronix E220 offers lots of features in order to let you have the most useful experience possible. Lantronix gives you a clean, neat and intuitive interface to configure your router in matter of second. You can also do software upgrades Over the Air (OTA): a very convenient way to operate when you have many routers at different locations |
|
Real time analysisOur interface let you analyze your CPU load, the traffic on every single interface linked to the router and their connection details. This tool allows you to check your connection parameters in real time. |
|
Flexible Wi-FiLantronix E220 is originally built to be ready for the world with advanced technologies: Wi-Fi b/g/n, configurable as WAN or access point with multiple SSID and advance security features such as WEP / WPA / WPA2 Mixed Mode. |
|
WAN switchable to LANLantronix E220 WAN port could be re-configured as a second LAN interface. |
FEATURES | E225FLZ2S | E225HPL2S | E224HPL2S | E228G002S |
---|---|---|---|---|
Processor speed | 580Mhz | 580Mhz | 580Mhz | 580Mhz |
Operating System | OpenWrt | OpenWrt | OpenWrt | OpenWrt |
RAM | 64MB | 128MB | 128MB | 128MB |
Flash | 32MB | 64MB | 64MB | 32MB |
SD Card | No | No | No | No |
Last Gasp (>10ºC) | No | 100sec | 100sec | 100sec |
RS232 | No | No | No | No |
RS485 | Yes | Yes | Yes | Yes |
Input/Output | 2 DI / 2 DO | 2 DI / 2 DO | 2 DI / 2 DO | 2 DI / 2 DO |
RTC | No | 3 days | 3 days | 100 days |
Temp Range | -20 to +55 | -30 to +70 | -30 to +70 | -30 to +70 |
DC Input | 9-60VDC | 9-60VDC | 9-60VDC | 9-60VDC |
GSM Engine | HL8518 | HL8518 | HL7692 | WP7607 |
Cellular | HSPA | HSPA | LTE Cat 1 | LTE Cat 4 |
4G Bands | NA | NA | 3/8/20 | 1/3/7/8/20/2 |
3G Bands | 1/8 | 1/8 | NA | 1/8 |
EVDO | NA | NA | NA | NA |
2G Bands | 3/8 | 3/8 | 3/8 | 3/8 |
CDMA | NA | NA | NA | NA |
Downlink | 7.2Mbps | 7.2Mbps | 10Mbps | 150Mbps |
Uplink | 5.76Mbps | 5.76Mbps | 5Mbps | 50Mbps |
SIM Slots | 1 | 1 | 1 | 1 |
WiFi | 2T2R | 2T2R | 2T2R | 2T2R |
WiFi Max Users | 40 | 40 | 40 | 40 |
GPS | OPT | YES | YES | YES |
HARDWARE | |
Material | Brushed aluminium alloy, DIN Rail mountable |
Dimensions | 61.25 x 85.75 x 24.5 mm without connectors |
Weight | Approx. 152 g |
Operating status
LED x 6 |
Alert / Power / Cellular signal, network and activity / Wi-Fi |
Operating temperature range | All Lite models: -20°C ~ +55°C All other models: -30°C ~ +70°C |
SDRAM | All Lite models: 512 Mbit All other models: 1 Gbit |
SOFTWARE | |
Administration / Network Protocols | Web-based user interface, set-up wizard, console log viewer, save / load configuration, NTP, SMS / OTA remote configuration, TR-069 capable |
Redundancy | Ethernet, cellular, Wi-Fi – configurable as failover or load-balancing |
Resilience | Network connectivity watchdog (configurable), internal application watchdog |
Wi-Fi | Client or Access Point (approx. 40-user), multiple SSID, WEP, WPA, WPA-PSK / WPA2-PSK security
modes |
M2M services |
ConsoleFlow – secure cloud platform to manage remote IoT gateways through a single pane of glass. |
Security | Zone-based firewall, VLAN, DMZ, HTTPS local and remote connection, SIM PIN |
Performance / Fault Management | Real time processor load and interface (WAN / LAN / Wi-Fi), traffic analysis, ICMP, trace-route, NS lookup |
Routing | DHCP, static routing, port-forwarding, traffic routing, static/dynamic DNS, DNS proxy, NAT, STP |
VPN | PPTP client, L2TP, OpenVPN client / server / pass- through, GRE, IPSec |
Industrial Protocols | Modbus RTU to TCP support, Modbus master |
INTERFACES | |
LAN | RJ45 connector with Tx / Rx LEDs |
RS-485 | Full- and half-duplex, 6 kV contact,
8 kV air discharge protection / 5-pin, 2.5 mm pitch COMBICON connector |
Wi-Fi | IEEE 802.11b/g/n 2T2R 2.4 GHz
(max. 300 Mbps throughput) / RP-SMA antenna connector (50 Ω) x 2 |
WAN | RJ45 connector with Tx / Rx LEDs; switchable to LAN 2 |
Cellular | SMA antenna connector x 1 (E225 models) or x 2 (E224 and E228 models) |
SIM | Mini SIM 1.8 V / 3.0 V
Optional dual SIM operation via a factory-fitted MFF SIM |
GPS* | SMA antenna connector either dedicated (E225 models) or shared with cellular diversity (E224 and E228 models) |
Digital I/O x 2 | Input – detection, 5 V ~ 48 V DC Output
– open collector, max. output 200 mA / 3-pin, 2.5 mm pitch COMBICON connector with common ground |
POWER | |
Main Source | Roadworthy** 10.8 V ~ 60 V DC on a 2-pin Micro-FitTM 3.0 female connector |
Alternate source* | Class 3 PD-PoE with seamless fall-back onto the main source |
Last Gasp* | Approx. 5-minute via two 96 mWh Li-ion batteries (not functional below -10°C) |
Â
*Not available on E225 Lite and E228G Mk II models **Compliant with ISO 7637-2:2011 and 2004 as well as ISO 21848:2005 |
Â
Â
Â
Â
E220 Series
Don’t see the certificate you need? Contact us to explore options and timelines for new certificates.
Keep your products up to date by downloading the latest firmware. You must log in or create a MyLantronix account to download firmware.Â
You must log in or create a MyLantronix account to view product change notifications.
Lantronix Part # | Name | Description | Order Now |
---|---|---|---|
Sorry, no parts were found that match that search query. | |||
ROUTERS | |||
Lantronix Part # E224HPL2S |
Name E220 Standard |
(Device Only) Router E224 EMEA - LTE Cat1 band 3, 8, 20 - 2G FB band 3, 8 - 2 Ethernet, RS485, PDPoE, Wifi, Last Gast, 2 I/O Ext temp, GNSS, Epack |
Contact Us |
Lantronix Part # E228HPL5S |
Name E220 Standard |
(Device Only) Router E228 DoCoMo JAPAN - LTE Cat4 band 1, 19, 21 - 2 Ethernet RS485, PDPoE, Wifi, Last Gast, 2 I/O Ext temp, GNSS, Epack |
Contact Us |
Lantronix Part # E228HPLAS |
Name E220 Standard |
(Device Only) Router E228 AT&T, Roger - LTE Cat4 band 2, 4, 5, 17 - 2 Ethernet RS485, PDPoE, Wifi, Last Gast, 2 I/O Ext temp, GNSS, Epack |
Contact Us |
Lantronix Part # E228HPL1S |
Name E228 Verizon |
(Device Only) Router E228 Verizon - LTE Cat4 band 2, 4, 5, 17 - 2 Ethernet RS485, PDPoE, Wifi, Last Gasp, 2 I/O Ext temp, GNSS, Epack |
Contact Us |
ACCESSORIES | |||
Lantronix Part # MF15 |
Name Accessory Bundle |
E225 Lite accessory bundle : Power cord KDC22, Antenna A31M0 & 2X A21HOÂ Din rail clip BR351 |
Contact Us |
Lantronix Part # MF16 |
Name Accessory Bundle |
E225G MKII, E225 accessory bundle : Power cord KDC22, Antenna A14M0 & 2X A21HOÂ Din rail clip BR351 |
Contact Us |
Lantronix Part # MF17 |
Name Accessory Bundle |
E228G MKII, E224, E228 accessory bundle : Power cord KDC22, Antenna 2X A22H0 & 2X A21H0Â Din rail clip BR351 |
Contact Us |
Power Supply | |||
Lantronix Part # P24E2 |
Name Power Supply |
ADAPTER, POWER 12V1.25A SWITCHING, WITH 4PIN SWB CONNECTOR, AC CABLE, PLUG, USA | Contact Us |
Power Supply | |||
Lantronix Part # P22E2 |
Name Power Supply |
ADAPTER, POWER 12V1.25A SWITCHING, WITH 2PIN MOLEX CONNECTOR, AC CABLE, PLUG, USA | Contact Us |
Power Supply | |||
Lantronix Part # P22E4 |
Name Power Supply |
ADAPTER, POWER 12V1.25A SWITCHING, WITH 2PIN MOLEX CONNECTOR, AC CABLE, PLUG, UK/HK | Contact Us |
Power Supply | |||
Lantronix Part # P22E3 |
Name Power Supply |
ADAPTER, POWER 12V1.25A SWITCHING, WITH 2PIN MOLEX CONNECTOR, AC CABLE, AUSTRALIA & NZ | Contact Us |
Power Supply | |||
Lantronix Part # P22E1 |
Name Power Supply |
ADAPTER, POWER 12V1.25A SWITCHING, WITH 2PIN MOLEX CONNECTOR, PLUG AC CABLE WITH PSE MARK, JAPAN | Contact Us |
Power Supply | |||
Lantronix Part # P22E0 |
Name Power Supply |
12V1.25A SWITCHING POWER ADAPTER, WITH 2PIN MOLEX CONNECTOR. EURO PLUG AC CABLE. | Contact Us |
By continuing to use the site, you agree to the use of cookies. more information
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.