xPico 270 Embedded IoT Gateway
Focus

The Apex of Industrial Wi-Fi Connectivity

Delivering seamless and secure Ethernet, Wi-Fi and Bluetooth connectivity, the Lantronix xPico 270 line of embedded IoT gateways allows OEMS to build and deploy their smart connected products with reduced complexity and lower risk.

The xPico 270 series is integrated with Lantronix Percepxionâ„¢ cloud-based IoT edge solution.

Key Features
  • Dual-band Wi-Fi (802.11 a/b/g/n/ac) and Ethernet
  • Enterprise Wi-Fi Security (EAP/802.1X)
  • Dual-mode Bluetooth and Bluetooth Low Energy (Bluetooth LE 4.2)
  • Automatic network connection management
  • Concurrent Soft AP + client mode for direct wireless service access without disrupting machine field operations
  • Lantronix Percepxionâ„¢ cloud-based IoT edge solution
  • Enables operation as network co-processor or wireless MCU
  • Approvals/Compliance: FCC, Industry Canada, EU (RED), AU/NZS, India, Taiwan, Mexico
  • Industrial-grade design for operation in extreme environments (-40 C to +85 C)
NDAA Compliant

xPico 270 Embedded IoT Gateway Overview

Featuring advanced enterprise security, intelligent networking, production ready software, and pre-integration with the Percepxionâ„¢ platform, xPico 270 embedded IoT gateways enables OEMs to go to market faster with their industrial IoT solutions.

High-performance Wi-Fi, Ethernet and Bluetooth Connectivity

Employing the Cypress 5G 802.11ac Wi-Fi module, the xPico® 270 gateway delivers dual-band 802.11ac Wi-Fi connectivity management and enterprise security for optimal device performance and communication within noisy industrial settings. In addition to high-performance Wi-Fi, the compact xPico 270 embedded gateway simplifies the deployment of robust Ethernet, Bluetooth and Bluetooth Low Energy (Bluetooth LE) connectivity without writing complex drivers. Its industry-leading compact SMT footprint fits it into any design and can operate in extreme environments.

Intelligent Networking and Advanced IoT Communication Engine

Simplify embedded application development and accelerate time to market with the xPico 270 gateway’s built-in network communications engine and flexible system integration modes. Completely offload IoT communications from your embedded microcontroller when operating as a network co-processor or use it as a wireless microcontroller with the provided SDK.

Field-tested TruPort® Serial technology supports transparent pass-through of hundreds of proprietary serial and standard Fieldbus protocols and TruPort® Socket technology enables complete control over multiple connections via TCP, UDP or TLS. Configure and control the gateway operation from the host microcontroller side using command mode or the network side with Web Service APIs and XML configuration data.

Lantronix InfiniShield™ – Comprehensive Device Security Framework

The xPico 270 line of embedded IoT gateways includes Infinishieldâ„¢, a comprehensive suite of built-in device security applications that offer robust and secure connections, data-at-rest protection for keys, configuration, secure boot and secure firmware-over-the-air (FOTA) updates, user role-based access control and fine-grained policy-based network service control.

Cloud-based Centralized Management Service

Scalable and secure cloud-based device management for the xPico 270 embedded IoT gateways, Lantronix Percepxionâ„¢ combines full operational awareness of any size deployment with over-the-network remote device management and maintenance to reduce your total cost of ownership.

xPico 270 Embedded IoT Gateway Tech Specs

Wireless LAN Specifications

  • IEEE 802.11 a/b/g up to 54 Mbps; 802.11 n (1×1) up to 150 Mbps;
    802.11ac up to 433 Mbps
  • 20, 40 and 80 MHz channel width with optional SGI
  • Dual Band 2.4 GHz and 5 GHz,
  • Supports IEEE 802.11 d/h/i
  • 802.11r fast roaming

Ethernet Specifications

  • IEEE 802.3 MAC, 10Base-T and 100Base-TX (RMII)

Bluetooth Specifications

  • Compliant to Bluetooth Core Specification version 4.2 (BR/EDR/Bluetooth LE)
  • Bluetooth LE Central and Peripheral Roles
  • Support for Generic Access Profile (GAP), Generic Attribute Profile (GATT), Device ID Profile, Serial Port Profile (SPP)

Data Communication

  • TruPort® Serial Technology— TCP and UDP Server Mode, TCP and UDP Client Mode, Multi-host Connect; TLS Client and Server
  • TruPort® Socket— Multi-host Client and Server Modes, HTTP(S), Sockets, TLS
  • Authenticated SMTP Support— Send email directly from device
  • Modbus TCP to Modbus RTU/ASC11 gateway.

Security and Authentication

  • InfiniShield® Security Software
    • Secure Boot, Secure Firmware-Over-the-Air (FOTA) Updates
    • Secure Key Storage, Encrypted Configuration
    • Secure Connections with SSL/TLS, HTTPS
    • Software Controlled Network Service Ports Enable/Disable
    • Role Based Access Control
  • AES/CCMP and TKIP encryption, WPA/WPA2 Personal
  • WPA2 Enterprise (EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST)
  • WPA3-Enterprise Transition Mode and WPA3-Personal (requires firmware v5.0.0.0 or later)
  • SSLv3/TLS 1.2 with PKI and X.509 Certificates (up to 4096-bit Keys)
  • AES Algorithm, 256-bit, 192-bit, 128-bit

Management Interfaces

  • Lantronix Percepxionâ„¢ cloud-based IoT edge solution, REST, MQTT
  • Lantronix Discovery Protocol (77FE)
  • Serial Port, Internal Web Server (HTTP/HTTPS)
  • XML Configuration and XML Status (CLI, API)
  • Secure Firmware Upgrade via HTTPS
  • Remote management with Percepxionâ„¢

Protocol Support

  • DHCP Client, Server (Soft AP), HTTP Server/Client
  • IPv4, TCP/IP, UDP/IP, ARP, ICMP, Auto-IP, DNS
  • SNMP v1/v2
  • IPv6

Wireless Features

  • Concurrent Soft AP + STA (Client), Client, Soft AP
  • Up to 5 simultaneous client connections to Soft AP interface
    • Up to 4 in Concurrent Mode
  • Connect to multiple WLAN networks, WLAN QuickConnect
  • Ethernet to Wi-Fi Client Bridge (Single Host Mode), Auto-MAC ID

Operating Conditions

  • Operating Temp: -40°C to +85°C; Storage Temp: -40°C to + 85°C
  • Vibration (Operational): 40G; Non-operational Shock: 65G
  • Storage Humidity: 10% to 85% relative humidity, non-condensing

Host Interfaces

  • Serial: UART Port TTL
    • Data Rates: 9600 bps to 4 Mbps (software selectable)
    • Control signals: DTR/DCD; Flow Control: RTS/CTS; XON/XOFF
  • USB (Host) 12 Programmable I/O Pins (GPIOs)
  • System Pins: RESET, DEFAULT, WAKE

Power

  • Input Voltage: 3.3VDC
  • Max Current Consumption (Boot Peak): 600 mA

Dimensions & Packaging

  • Dimensions: 17mm x 25mm x 2mm (LGA); 22mm x 35.5mm x 2.73 mm (Edge Card)
  • For LGA: Tape and Reel, MSL 3
  • For Edge Connector: Tray

Certifications & Compliance (Planned for Product Release)

  • Type Approvals: USA (FCC Part 15), Canada (IC RSS), EU (RED), AU/NZS
  • Safety: IEC 62368 EN 62368, EN 62311, UL 60950
  • RoHS, REACH

Warranty

  • 5-Year Limited

Warranty

xPico 270 Embedded IoT Gateway Downloads

CAD

Check out the CAD files of our product to better meet your needs. You must log in or create a MyLantronix account to access CAD Files.

Datasheets

Learn more about this product with the Datasheet. You must log in or create a MyLantronix account to access Datasheets. 

Firmware Downloads

Keep your products up to date by downloading the latest firmware. You must log in or create a MyLantronix account to download firmware. 

Product Notifications

You must log in or create a MyLantronix account to view product change notifications.

Lantronix Part # Name Description Order Now
Sorry, no parts were found that match that search query.
Lantronix Part #
XPC270100B
Name

xPico 270 Embedded IoT Gateway, 802.11 a/b/g/n/ac Wi-Fi, Ethernet, Bluetooth, Dual u.fl Antenna, Ind. Temp, LGA, T&R 250

Buy Now
Lantronix Part #
XPC270300B
Name

xPico 270 Embedded IoT Gateway, 802.11 a/b/g/n/ac Wi-Fi, Ethernet, Bluetooth, Dual u.fl Antenna, Ind. Temp, Edge Connector, Tray

Buy Now
Lantronix Part #
XPC270100S
Name

xPico 270 Embedded IoT Gateway, 802.11 a/b/g/n/ac Wi-Fi, Ethernet, Bluetooth, Dual u.fl Antenna, Ind. Temp, LGA, T&R 25-pack

Buy Now
Lantronix Part #
XPC270300S
Name

xPico 270 Embedded IoT Gateway, 802.11 a/b/g/n/ac Wi-Fi, Ethernet, Bluetooth, Dual u.fl Antenna, Ind. Temp, Edge Connector, Single

Buy Now
Accessories
Lantronix Part #
500-180-R-ACC
Name
Cable

ACCESSORY, CABLE, ANTENNA, U.FL to R-SMA, 152.40 mm Length, 10-pc Bulk Pack.

Buy Now
Lantronix Part #
500-181-R-ACC
Name
Cable

ACCESSORY, CABLE, ANTENNA, U.FL to U.FL, 152.40 mm Length, 10-pc Bulk Pack.

Buy Now
Lantronix Part #
500-182-R-ACC
Name
Cable

ACCESSORY, CABLE, ANTENNA, U.FL to R-SMA, 38.10 mm Length, 10-pc Bulk Pack.

Buy Now
Lantronix Part #
ACC-500-0378-00
Name
Cable

ACCESSORY, CABLE, ANTENNA, U.FL to U.FL, 254 mm Length (10 inch).

Buy Now
Lantronix Part #
ACC-500-0390-00
Name
Cable

ACCESSORY, CABLE, ANTENNA, U.FL to R-SMA, 254mm Length (10 inch).

Contact Us
Lantronix Part #
ACC-930-033-R
Name
Antenna

ACCESSORY, ANTENNA, 2.4 GHZ and 5GHZ, 2.15 dBi, RP-SMA, ROHS

Contact Us
Lantronix Part #
XPW100A003-01-B
Name
Antenna

ACCESSORY, ANTENNA, U.FL to PCB Strip (50 mm cable), 2.5dBi 2.39 GHz to 2.49 GHz, 5 dBi 4.9 GHz to 5.9GHz,

Contact Us
Compatible Accessories
Lantronix Part #
XPC240300EK
Name
xPico 240 Evaluation Kit
xPico 240 Evaluation Kit, Embedded IoT GW, Dual-band Wi-Fi, Eth Buy Now
Lantronix Part #
XPC250300EK
Name
xPico 250 Evaluation Kit
xPico 250, Evaluation Kit, Embedded IoT GW, Dual-band Wi-Fi, Eth, Bluetooth 4.2 Buy Now
Lantronix Part #
XPC270300EK
Name
xPico 270 Evaluation Kit
xPico 270 Embedded IoT Gateway, Evaluation Kit, Wi-Fi, Bluetooth 4.2 + Ethernet Buy Now
scroll to top

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close