Cisco Compatible CWDM SFP+ Modules
10GBase-ER/EW/10G Fiber Channel, SFP+ With DMI Single Mode (LC)
Applications include: 10G Ethernet Switches and Routers, xDSL Applications, and Metro Edge Switching.
TN-CWDM-10G-1xx0-40 Series Overview
- Compliant with 10GBase-ER/EW
- SFF-8472 Digital Diagnostic Function (DMI)
- Maximum Link Length of 40 km
- RoHS Compliant
- SFP+ Optical Transceiver with duplex LC connector
- Single +3.3 V Power Supply
TN-CWDM-10G-1xx0-40 Series Tech Specs
- IEEE 802.3ae
- -5.5nm < λc < +7.5nm
- Width: 0.52” [13 mm]
- Depth: 2.18” [55 mm]
- Height: 0.33” [8 mm]
- +5V, 3.3V
- Operating: 0°C to 70°C
- Storage: -40°C to 85°C
- IEC-60825, FDA 21, CFR 1040.10 and 1040.11
TN-CWDM-10G-1xx0-40 Series Resources
TN-CWDM-10G-1xx0-40 Series Downloads
Note: Some Documentation may have Transition Networks named or pictured. Transition Networks was acquired by Lantronix in August 2021. Learn more about the acquisition here.
TN-CWDM-10G-1xx0-40 Series Part Numbers
Note: The Lantronix TN-CWDM-40G-1xx0-40 10G modules are Cisco Compliant* and are designed for bi-directional serial-optical data communications such as 10G Ethernet. Each X2/XFP/SFP+ operates at a nominal CWDM wavelength. There are 8 wavelengths available in 20nm steps from 1470nm to 1610nm.
*Lantronix’ X2/XFP/SFP+ modules fully comply with the Multi-Sourcing Agreement (MSA). This compliance allows our X2/XFP/SFP+ modules to be used in all other MSA compliant XFP platforms. In addition, TN-CWDM-10G-1xx0-40 modules are also Compliant with all Cisco X2/XFP/SFP+-based equipment, as well as Cisco’s IOS software. Lantronix SFP modules ARE NOT Cisco OEM brand modules.
© Lantronix, Inc. 2022. All Rights Reserved.