S6310-3340 New
ION POTS Media Converter
S6310-3340
The S6310-3340 is a stand-alone media converter that provides an interface between a twisted pair RJ-11 port and a fiber port, allowing users to connect central-office voice grade signals to
distant Plain Old Telephone equipment (POTS) utilizing standard telephone signaling. Two units are required to implement an end to end system. The first unit connects to a telephone line or
PBX and is configured to act as a telephone (FXO Mode) and has the ability to detect ringing voltages. The second unit is the reciprocal unit and is configured to have the ability to act as a
Central Office and connects to a telephone device (FXS Mode).
Together, the modules allow legacy analog phone lines to be extended over fiber for both permanent installations as well as temporary job-site installations.
S6310-3340 Overview
Features
- Audio transmission of voice grade signals
- Supports ringing at distant end
- Supports Caller ID
- Configurable worldwide country formats
- Must be deployed in pairs
– ION chassis card and stand-alone unit
– ION chassis card and ION chassis card
– Stand-alone unit and stand-alone unit - Single product configurable to either FXO mode or FXS mode
- Automatic Ring Down supported when both converters are configured to FXS Mode
- SFP based product
– Uses Gigabit Ethernet SFP Modules
– Lantronix offers a wide variety of SFP modules to support multimode or singlemode fiber, as well as dual or single strand fiber installations - Supports in-band management of remote stand-alone unit when linked to a POTS
slide-in-card installed in a managed ION chassis - Electrical interface is provided through an RJ-11 female connector
- Only supports analog POTS lines
- Compatible with traditional telephone modems
Applications
- Provides voice grade service to extend useful life of legacy analog telecom equipment
- Acts as a telephone and connects to a telephone line or PBX
- Acts as a central office and connects to a telephone device
- For use in permanent or temporary job-site installations
S6310-3340 Tech Specs
- FCC Part 68
- ETSI ES 203-021 (TBR21)
- ISED CS-03
- Connector: RJ11
- Impedance: 600 ohms
- REN: 1.0
- Ring Cadence: 25 Hz
- Impedance: 600 ohms
- Battery Source: 48 VDC +/- 5V
- Ringing Supply: 90Vp-p
- Ring Frequency: 16-65 Hz
- SW1 Up = FXO Down = FXS
- SW2 Up = Normal Down = FXS Reversed
- SW3 Up = U-Law Down = A-Law
- SW4 not used
- SW5 – SW8 Country Code Select
- Pwr: On = power is on
- FL: On = fiber link is up
- ACTC: On = Off-Hook, Blink = Ringing, Off = On-Hook
- Width: 3.25” [82 mm]
- Depth: 6.5” [165 mm]
- Height: 1.0” [25 mm]
- 2.0 Watts without the SFP
- External AC/DC provided; 12 VDC, 1.25A Output
- Unregulated, UL Listed
- Operating: 0°C to 50°C
- Storage: -40°C to +85°C
- Humidity: 5% to 95% (non-condensing)
- Altitude: 0 – 10,000 ft.
- 2 lb. [0.9 kg]
- Emissions: EN55032 Class A, FCC Part 15 Class A
- Immunity: EN55024
- Safety: CE Mark
- Lifetime
Standards
Analog Port
FXS Mode
FXO Mode
Dip Switches
Status LEDs
Dimensions
Power Consumption
Power Supply
Environment
Weight
Compliance
Warranty
S6310-3340 Resources
Application Spotlights
Videos
Press Releases
Case Studies
S6310-3340 Downloads
S6310-3340 Part Numbers
- Lantronix Worldwide Offices – Find an office in your region from our list of worldwide offices.
- Find a Lantronix Partner – Lantronix products are available from a variety of leading technology vendors.
| S6310-3340 | S6310-3340 |
Stand-alone Media Converter |
||
| Lantronix Part # | Name | Description | Order Now | |
|---|---|---|---|---|
Fiber Type, Optical Wavelength, Transmission Distance, and Link Budget all based on selected SFP module. S6310-3340 supports any standard 1000Mbps SFP modules.
Must be paired with another stand-alone S6310-3340 or a chassis-based C6310-3340.
Compatible Accessories
| Lantronix Part # | Legacy Part # | Name | Description | Order Now |
|---|---|---|---|---|
| SFP Modules | SFP Modules | See Relevant SFP Modules | ||
| SPS-UA12DHT | SPS-UA12DHT | Industrial Power Supply |