M/GE-PSW-PSE-01
Focus

Mini Fast / Gigabit Ethernet PoE+ Media Converter
10/100/1000Base-T PoE+ RJ-45 Port + 100/1000Base-X SFP Slot

Product Brief

This Gigabit Ethernet Stand-alone Mini Media Converter provides cost-effective media conversion between 10/100/1000Base-T ports and 100/1000Base-SX/LX ports. With its fixed configuration, deployments are just plug-and-play, and its small size makes it ideal for locations where space is limited. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, but it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber.

In addition to providing copper to fiber conversion, this converter is also classified as Power Sourcing Equipment (PSE), meaning it combines data received over the fiber optic link with 56VDC input power to provide power and data to a Powered Device (PD) over the twisted Pair cable, while complying with the IEEE 802.3af and IEEE 802.3at PoE+ standards. This allows the user to take advantage of the benefits of fiber cabling, along with the benefits of Power-over-Ethernet (PoE) technology.

Supporting PoE allows this converter to send data and power to devices like VoIP Phones, Security Cameras, and Wireless Access Points, especially if they need to be located in remote areas of your network that can only be reached with fiber optic cabling.

M/GE-PSW-PSE-01 Overview

Features

Wall mount, DIN Rail, or table top installation
External AC/DC power supply included with country specific power cord
2-port 10/100/1000 copper to fiber media conversion with IEEE 802.3at PoE+ on the copper port
Supports full 30 Watts of power to the twisted pair port
SFP slots can support any 100Base-FX or 1000Base-X fiber SFP module
Supports Auto-Negotiation
Supports Auto-MDI/MDIX
Active Link Pass Through (ALPT)
- Automatically detect the loss of Receive (Rx) signals on either fiber or copper port and propagate the failure to the end devices
Auto Power Reset
- Re-set the power to the end PD device during a Link Pass Through (LPT) event, ensuring it is ready to go when the fault is corrected
Jumbo frame support
8K MAC address table
LEDs indicators for power status, Link/Activity per port, & PoE status/ classification
Plug-and-Play fixed configuration, no dip-switches
Over-current protection
Under-current protection
Fault protection input

M/GE-PSW-PSE-01 Tech Specs

Standards

IEEE 802.3-2012
IEEE 802.3af/at PSE-PoE
IEEE 802.3ab
IEEE 802.3z
IEEE 802.3x
IEEE 802.3az

Switch Features

Max Packet Size: 10,000 bytes
Max MAC Addresses: 8k
1Mbit shared buffer memory

Status LEDs

PWR: On (green) = Power to converter
PoE: Off = No PD detected, On = AF mode or AT mode
Top LED TP Status
Bottom LED Fiber Status

Dimensions

Width: 1.8” [46 mm]
Height: 0.85″ [22 mm]
Depth: 3.3” [85 mm]

Power Consumption

34W with full IEEE 802.3at 30 Watt load

Power Source

External AC/DC 56VDC, 40W power adapter (65W for -JP power supply bundle)

Power-over-Ethernet

Max PoE Budget: 30 Watts

Environment

Operating: 0°C to +40°C (with included power supply)
Storage: -40°C to +85°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.

Weight

2 lbs. [0.9 kg]

MTBF

M/GE-PSW-PSE-01 only: 2,941,024 hours (Telcordia SR-332)
Included Power Supply only:
25173: 159,357 hours (MIL-DHBK-217F)
25188 (-JP Only): 300,000 hours (Telcordia SR-332)

Certifications

EN55032-2012 Class A, IEC 61850-3:2002, EN55024-2010, CE Mark, Power Supply is UL listed

Warranty

Lifetime

Warranty

Lifetime

M/GE-PSW-PSE-01 Downloads

Product Brief

M/GE-PSW-PSE-01 Product Brief

373 KB

View

Additional Product Information

Note: Some Documentation may have Transition Networks named or pictured. Transition Networks was acquired by Lantronix in August 2021. Learn more about the acquisition here.

Matrix

PoE Switches & Media Converters Matrix

348 KB

View

User Guides

M/GE-PSW-PSE-01 User Guide Rev B

722 KB

View

M-GE-PSW-PSE-01 User Guide Rev C

1 MB

View

Visio Stencils

Plan your network with Microsoft Visio Stencils. You must log in or create a MyLantronix account to access Visio Stencils.

M/GE-PSW-PSE-01 Part Numbers

Lantronix Part #	Name	Description	Order Now
Sorry, no parts were found that match that search query.

Lantronix Part # M/GE-PSW-PSE-01	Name M/GE-PSW-PSE-01	10/100/1000Base-T PoE+ RJ-45 port [100 m/ 328 ft.] to 100/1000Base-X SFP slot (empty)	Contact Us
Compatible Accessories
Lantronix Part # SFP Modules	Name SFP Modules		Contact Us
Lantronix Part # WMBM	Name WMBM	3.3” [84 mm] Wall Mount Bracket Fits all “Mini” Media Converters	Contact Us
Lantronix Part # RMBM	Name RMBM	Rack mount bracket for mini media converters, used with E-MCR-05 and RMS19-SA4-02	Contact Us
Lantronix Part # DRBM	Name DRBM	3.3” [84 mm] DIN Rail Mount Bracket for “Mini” Media Converters, fits all “Mini” Media Converters	Contact Us