NM2-FXS-2230-SFP-01

NM2-FXS-2230-SFP-01

M.2 Fast Ethernet Fiber Network Interface Card for Dell OptiPlex™ 7040/7050 & 7080/7090 (35W) Micro PCs & Wyse 7000 Series
100Base-FX

NM2-FXS-2230-SFP-01-768x768
  • NM2-FXS-2230-SFP-01-768x768
  • NM2-FXS-2230-SFP-01-pieces

Lantronix M.2 Fast Ethernet Fiber Network Interface Card (NIC) provides a fiber optic interface for the Dell OptiPlex™ 7040, 7050, and 7080/7090 (35W) Micro PC & Wyse 7000 Series Thin Clients. The NM2-FXS-2230-SFP-01 consists of a M.2 NIC that installs into the OptiPlex Micro PC’s M.2 “A or E keyed” interface, a fiber optic adapter that installs into the OptiPlex Micro PC’s Option port, and a 20-pin Flat Flex Cable (FFC) that connects the NIC to the fiber adapter. The fiber optic adapter is an open SFP with a 100Base-FX to SGMII SFP Module (included).

NM2-FXS-2230-SFP-01

Related Products

NM2-FXS-2230-SFP-01 Overview

Features

  • PCI Express M.2 compliant
  • A + E keyed M.2 interface
  • Full duplex
  • Flow control
  • Wake on LAN (WOL)
  • Smart Load Balancing (SLB)
  • TCP Segmentation Offload (TSO)
  • Message Signaled Interrupts (MSI)
  • Extended Message-Signaled Interrupts (MSI-X)
  • LACP support (Teaming)
  • IPv6 Capable
  • Supports UEFI
  • Supports PXE boot
  • Jumbo frame support 9014 bytes
  • 100Base-FX to SGMII SFP interface

NM2-FXS-2230-SFP-01 Tech Specs

    Standards

    • IEEE 802.3-2012

    Bus Slot

    • M.2 – ‘2230-D4-A-E’

    Data Rate

    • 100 Mbps (full duplex only)

    Max Frame Size

    • 9014 bytes

    Status LEDs

    • LINK/ACT
    • ON = Link
    • Flashing = Activity

    Dimensions (M.2 NIC)

    • M.2 NIC
      • 2230-D4-A-E
      • Width: 0.87” [22 mm]
      • Depth: 1.18” [30 mm]
      • Height: 0.12” [3.08 mm]
    • Fiber Interface)
      • Width: 1.65” [42 mm]
      • Depth: 2.05” [52 mm]
      • Height: 0.51” [13 mm]
    • FFC Cable
      • Length: 2.99” [76 mm]

    Software Support

    • Windows 10, 8, 8.1, and 7 (32/64 bit); Linux

    Power Consumption

    • 120mA @ 3.3V (0.4 Watts typical not including SFP module)
    • (SFP) 330mA @ 3.3V (1 Watt typical)

    Power Source

    • M.2 interface connector: 3.3V (Refer to table 41 of M.2 Specification)

    Environment

    • Operating: 0°C to +45°C
    • Storage: -40°C to 85°C
    • Humidity: 5% to 95% (non-condensing)
    • Altitude: 0 – 10,000 ft.

    Weight

    • 0.1 lbs. [0.05 kg]

    Certifications

    • CE Mark; Emissions: EN55032, FCC Part 15 Class A
    • Immunity: EN55024

    Warranty

    • Lifetime

NM2-FXS-2230-SFP-01 Resources

Application Spotlights
Videos
Press Releases
Case Studies

NM2-FXS-2230-SFP-01 Downloads

Note: Some Documentation may have Transition Networks named or pictured. Transition Networks was acquired by Lantronix in August 2021. Learn more about the acquisition here.

Document Size
Windows 8 – 64bit Driver (ZIP 72.17 MB) 72 MB
Windows 8 – 32bit Driver (ZIP 51.67 MB) 52 MB
Windows 7 – 64bit Driver (ZIP 54.46 MB) 54 MB
Windows 7 – 32bit Driver (ZIP 43.68 MB) 44 MB
Windows 10 – 64bit Driver (ZIP 72.17 MB) 72 MB
Windows 10 – 32bit Driver (ZIP 51.67 MB) 52 MB
Fiber-to-the-Desk Application Note 434 KB
NM2-FXS-2230-SFP-01 Datasheet (218.76 KB) 219 KB
Installation Guide Rev C (PDF 1.08 MB) 1 MB
M.2 Ethernet Fiber Network Interface Card Overview (PDF 204.63 KB) 205 KB
Linux Proadmin (ZIP 5.57 MB) 6 MB
Linux Preboot (ZIP 10.72 MB) 11 MB

Resources

  • Request CAD Files ( )

    • NM2-FXS-2230-SFP-01 Part Numbers

    NM2-FXS-2230-SFP-01 NM2-FXS-2230-SFP-01

    M.2 NIC, 100Base-FX to SGMII SFP media converter (included)
    Lantronix Part # Name Description Order Now