Industrial Power Supply, 90 ~ 264 VAC; 127 ~ 370 VDC

Product Details

90 ~ 264 VAC; 127 ~ 370 VDC

90 ~ 264 VAC; 127 ~ 370 VDC

NDAA Compliant

25148 Overview


  • Universal AC input/full range
  • 3 pole AC inlet IEC320-C14
  • Built-in active power factor controller function
  • Industrial (-30°C to +70°C) operating temperature
  • No load power consumption ≤0.15 Watts
  • Energy efficiency Level VI
  • Compliant with EIASA 2007/DoE, NRCan, AU/NZ MEPS, EU ErP and
  • CoC Version 5
  • Class 1 power (with earth pin)
  • Short circuit/overload/over voltage/over temperature protection
  • Fully enclosed 94V-0 flame retardant plastic case
  • LED power on indicator

25148 Tech Specs


  • 4-pin DIN plug (see plug assignment)


  • UL1185 16AWG

Output Voltage

  • 48V (Output voltage set at point measure by plug terminal +50% load)

Rated Current

  • 1.87A

Current Range

  • 0-1.87A

Rated Power

  • 90W (max)

Ripple & Noise

  • 240mVp-p (max) (Measured at 20MHz by using a 12” twisted pair terminated with a 0.1uf &47uf capacitor)

Voltage Tolerance

  • ±2.5% (Includes set up tolerance, line regulation, load regulation)

Line Regulation

  • ±1.0% (Line regulation is measured from low line to high line at rated load)

Load Regulation

  • ±2.5%

Setup, Rise Time

  • 1000ms, 50ms/230VAC; 1000ms, 50ms/115VAC at full load (Length of setup time is measured at first cost start. Turning ON/OFF the power supply may lead to increase of the setup time)

Hold Up Time

  • 20ms/230VAC typ; 20ms/115VAC at full load typical

Input Voltage

  • 90-264VAC, 127-370VDC (Derating may be needed under low input voltages. Check the derating curve for more details.)

Input Frequency Range

  • 47-63 Hz

Power Factor

  • PF>0.91/230VAC typical; PF>0/95/115VAC at full load typical


  • 91% typical

AC Current

  • 1.3A/115VAC typical; 0.6A/230VAC typical

Inrush Current

  • 70A/230VAC (max)

Leakage Current

  • 1mA/240VAC (max)

Withstand Voltage

  • I/P-O/P: 3KVAC, I/P-FG: 2KVAC. O/P-FG: 0.5KVAC

Isolation Resistance

  • I/P-O/P, I/P-FG, O/P-FG: 100M
  • Ohms/500VDC/25°C/70%RH


  • Overload: 110-150% rated output power (Hiccup mode, recovers automatically after fault condition is removed)
  • Overvoltage: 105-135% rated output voltage (Shut down o/p voltage, re-power on to recover)
  • Over Temperature: Shut down o/p voltage, re-power on to recover


  • Width: 5.71” [145 mm]
  • Depth: 2.36” [60 mm]
  • Height: 1.26” [32 mm]


  • Operating: -30°C to +70°C (See derating curve)
  • Storage: -40°C to +85°C
  • Humidity: 20% to 90% (non-condensing)


  • 0.99 lbs. [0.45 kg]


  • 348.7K hours min MIL-HDBK-217F (25°C)


  • 10-500Hz, 2G 10min/1 cycle period for 60 min each
    along X,Y,Z axes


  • Safety: UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS 14336, CCC Gb4943, PSE J60950-1, AS/NZS 60950.1 approved
  • Emmisions: EN55022 class B, EN61000-3-2,3, FCC Part 15/CISPR22 class B, CNS13438 class B, GB9254, GB17625.1
  • Immunity: EN61000-4-2,3,4,5,6,8,11 light industry level, criteria A


Additional Product Information

Note: Some Documentation may have Transition Networks named or pictured. Transition Networks was acquired by Lantronix in August 2021. Learn more about the acquisition here.

Product Information

Compatible Products

EOCPx Series

Ethernet Over Coax Extender With PoE+
(1) 100/1000Base RJ-45/SFP Port + (1) 1000Base Coax BNC Port

EO2Px Series

Ethernet Over 2-Wire Extender With PoE+

(1) 10/100/1000Base RJ-45/SFP Combo Port + (1) 1000Base-T RJ-45 Port or 2-Wire Terminal Block

scroll to top

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.