SISPM1040-582-LRT

Managed Hardened Gigabit Ethernet PoE++ Switch
(8) 10/100/1000Base-T PoE++ Ports + (2) 100/1000Base-X SFP Slots

LTX-SISPM1040-582-LRT
  • LTX-SISPM1040-582-LRT
  • LTX-SISPM1040-582-LRT-front
  • SISPM1040-582-LRT-back

The SISPM1040-582-LRT is a managed PoE++ switch suitable for connecting and powering devices in hardened environments. It has (8) 10/100/1000 PoE++ ports with (2) 100/1000 dual speed SFP slots. The switch can supply up to 90 Watts per port on (4) ports or 60 Watts per port on (8) ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Lantronix ’ hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments.

SISPM1040-582-LRT

Request a Demo of Device Management System (DMS) Software

SISPM1040-582-LRT Overview

Features

  • Plenum UL certified
  • IPv4/IPv6 dual protocols
  • Supports Jumbo Frame up to 9K bytes
  • Authentication – RADIUS, TACACS+
  • DHCP Relay, DHCP Snooping, DHCPServer
  • L2/L3/L4 ACLs Support MAC, VLAN ID, or IP address, protocol, per port
  • LLDP (Link Layer Discovery Protocol)
  • ITU-T G.8031 Ethernet Linear Protection
  • ITU-T G.8032 Ethernet Ring Protection Switching
  • Rapid Ring for fast recovery
  • IEEE 802.3az Energy Efficiency
  • IP Source Guard, Port Security
  • Port Mirroring
  • Syslog

PoE Features

  • Compliant with IEEE 802.3bt PoE++
  • Compliant with IEEE 802.3at PoE+
  • Compliant with IEEE 802.3af PoE
  • IEEE 802.1AB LLDP-MED Configuration
  • PoE Configuration
  • PoE Scheduling
  • Power Delay
  • Auto Power Reset
  • DHCP per Port
  • Always on PoE

Software Features

  • Management: Web Management, SNMP V1/V2c/V3, SSH, CLI
  • Port Trunk: Supports IEEE 802.3ad port trunk with link aggregation control protocol (LACP) and static trunk
  • Multicast: Support IGMP Snooping V1/V2/V3, MVR, MLD Snooping V1/V2
  • Quality of Service: Supports 8 hardware queues. Strict priority and WRR, Ingress policer, Egress shaping and per port rate control
  • Spanning Tree: Supports IEEE 802.1s MSTP, IEEE 802.1w RSTP and IEEE 802.1D STP Compliant
  • VLAN: Port Based VLAN, IEEE 802.1Q tag-based, up to 4k VLAN entries, QinQ, MAC-based VLAN, Management VLAN, Voice VLANs, and Private VLAN
  • Firmware Update through TFTP and HTTP/HTTPs
  • IEEE 802.3ah, IEEE 802.1ag, ITU-T Y.1731
  • Support IEEE 1588 v2 PTP
  • Media Redundancy Protocol (MRP)
  • Static Routing

Device Management System

  • Graphical Monitoring – Topology view, Floor view, Map view
  • Traffic Monitoring
  • Troubleshooting – Network Diagnostic, protection mechanism, performance and link management

SISPM1040-582-LRT Tech Specs

      Standards

      • IEEE 802.3
      • IEEE 802.3u
      • IEEE 802.3z
      • IEEE 802.3ae
      • IEEE 802.3x
      • IEEE 802.3ad
      • IEEE 802.1D
      • IEEE 802.1w
      • IEEE 802.1s
      • IEEE 802.1Q
      • IEEE 802.1p
      • IEEE 802.1ad
      • IEEE 802.1AB
      • IEEE 802.3af
      • IEEE 802.3at
      • IEEE 802.3bt
      • IEEE 802.3ah
      • IEEE 802.1ag
      • IEEE 802.3az
      • IEEE 1588 v2
      • ITU-T Y.1731
      • ITU-T G.8031
      • ITU-T G.8032
      • IEC62439-2

      Protocols

      • CSMA/CD

      Technology

      • Store-and-forward switching architecture

      Connectors

      • (8) 10/100/1000 Mbps RJ-45 ports
      • (2) 100/1000 Mbps SFP slots
      • (1) Console RJ-45 port

      MAC Address

      • 8K MAC address table

      Backplane

      • 20 Gbps

      DIP Switch

      • Rapid Ring Setting (2-Pin)

      Reset Button

      • Reset the switch, restore factory default

      Digital Output (relay)

      • 24VDC/1A

      Digital Input

      • Level 0 (Low): 0V to 6V
      • Level 1 (High): 10V to 24V

      Dimensions

      • Width: 2.44” [62 mm]
      • Depth: 5.12” [130 mm]
      • Height: 5.31” [135 mm]

      Power Consumption

      • 13 Watts (without PoE)

      Power Input

      • 52 – 57VDC dual inputs Terminal Block

      Power-over-Ethernet

      • Max PoE Budget 480 Watts
      • 60 Watts for (8) ports simultaneously
      • Up to 90 Watts on (4) ports simultaneously

      Ingress Protection

      • IP30

      Environment

      • Operating: -40°C to +75°C (DC input)

      MTBF

      • 82,976 hours

      Certifications

      • FCC Class A; CE; NEMA TS-2, UL 2043, UL 2108
      • Safety: EN62368-1, UL62368-1

      Compliant*

      Designed to Meet *Please contact sales with certification needs

      • IEC61850-3, IEEE 1613, Class 1 Div 2

      Warranty

      • 5 Years

    SISPM1040-582-LRT Part Numbers

    SISPM1040-582-LRT SISPM1040-582-LRT

    (8) 10/100/1000Base-T PoE++ ports + (2) 100/1000Base-X SFP slots 52V – 57 VDC (Din Rail Bracket included)

    Lantronix Part # Name Description Order Now

    Compatible Accessories

    Lantronix Part # Legacy Part # Name Description Order Now
    SFP Modules SFP Modules See Relevant SFP Modules
    OCA-P181610 OCA-P181610 Outdoor Cabinet Assembly 18 x 16 x 10” Polycarbonate Enclosure for Outdoor Switches
    DRBH-01 DRBH-01 Din Rail Bracket for Hardened Switches
    WMBH-01 WMBH-01 Wall Mount Bracket for SISPM1040-384-LRT-C, SISPM1040-362-LRT, SISPM1040-582-LRT
    25160 25160 Hardened DIN Rail Mounted Power Supply
    PS-DC-DUAL-5624T PS-DC-DUAL-5624T Stand-Alone Hardened Power Supply 345 Watt Isolated Power Supply with 56VDC and 24VDC Dual Output
    EDCA-DIO-01 EDCA-DIO-01 Enclosure Door Contact Alarm
    25104 25104 Industrial DIN Rail Mounted Power Supply
    MS-PLUGIN-01 Milestone XProtect Integration A Software Plugin for Monitoring Alarms and Quick Links for Latronix Switches