SM24TBT2DPB New

Managed Gigabit Ethernet PoE++ Switch
(24) 10/100/1000Base-T Ports + (2) 100/1000Base-X SFP/RJ-45 Combo Ports

SM24TBT2DPB
SM24TBT2DPB
  • SM24TBT2DPB
  • SM24TBT2DPB-front
  • SM24TBT2DPB-back

This switch is a high performance Layer 2 managed switch with 52 Gbps switching capacity. It provides (24) 10/100/1000Mbps copper ports with IEEE 802.3bt PoE++ capability and (2) additional 100/1000Mbps dual speed SFP/RJ-45 combo ports. The SM24TBT2DPB complies with the latest IEEE 802.3bt PoE++ standard and supplies up to 90 Watts per port. It can provide full PoE++ output on all 24 ports when equipped with the dual hot-swappable PS-ACDC-1200 power supplies. The SM24TBT2DPB can be powered by low-line and high-line AC or DC power and Digital Electricity*, making it ideal for use in a wide variety of building applications.

* Digital Electricity is a trademark of VoltServer. For more information about Digital Electricity, visit voltserver.com. 

SM24TBT2DPB New

Request a Demo of Device Management System (DMS) Software

SM24TBT2DPB Overview

Features

  • Hot-swappable dual power supply modules
  • Supports IPv4/IPv6 dual protocol stack
  • Supports Jumbo Frame up to 9K bytes
  • Authentication – RADIUS, TACACS+
  • Security – Supports SSH v1/SSH v2/SSL
  • Port based or tagged (IEEE 802.1Q) VLAN, MAC based, Management VLAN and Private VLAN Edge
  • DHCP Relay, DHCP Server
  • L2/L3/L4 ACLs Support MAC ACL, IP standard/extended ACL
  • LLDP (Link Layer Discovery Protocol)
  • IEEE 802.3az Energy Efficiency
  • IP Source Guard, Port Security

PoE Features

  • Compliant with IEEE 802.3bt PoE++
  • Compliant with IEEE 802.3at PoE+
  • Compliant with IEEE 802.3af PoE
  • IEEE 802.1AB LLDP-MED Configuration
  • PoE Configuration
  • PoE Scheduling
  • Auto Power Reset
  • DHCP per Port
  • Always on PoE
  • Ultra-fast PoE

Software Features

  • Management: Web Management, SNMP V1/V2c/V3, Telnet, CLI
  • Port Trunk: Supports IEEE 802.3ad port trunk with link aggregation control protocol (LACP) and static trunk
  • IGMP: Support IGMP Snooping V1/V2/V3, GVRP, IGMP Proxy, and IGMP Querier
  • Quality of Service: Supports 8 hardware queues. Strict priority and WRR
  • Spanning Tree: Supports IEEE 802.1s MSTP, IEEE 802.1w RSTP and IEEE 802.1D STP Compliant
  • Rapid Ring
  • VLAN: Port Based VLAN, IEEE 802.1Q tag-based, up to 4k VLAN entries, QinQ, MAC-based VLAN, Private VLAN, Voice VLANs and Management VLAN
  • Firmware Update, configure backup/restore through TFTP and HTTP

Device Management Software

  • Graphical Monitoring – Topology view, Floor view, Map view
  • Traffic Monitoring
  • Troubleshooting – Network diagnostic, protection mechanism, performance and link management

SM24TBT2DPB Tech Specs

    Standards

    • IEEE 802.3
    • IEEE 802.3u
    • IEEE 802.3z
    • IEEE 802.3ae
    • IEEE 802.3x
    • IEEE 802.3ad
    • IEEE 802.1D
    • IEEE 802.1w
    • IEEE 802.1s
    • IEEE 802.1Q
    • IEEE 802.1p
    • IEEE 802.1ad
    • IEEE 802.1AB
    • IEEE 802.3af
    • IEEE 802.3at
    • IEEE 802.3bt
    • IEEE 802.3az

    Connectors

    • (1) RJ console port
    • (24) 10/100/1000 RJ-45 ports
    • (2) 100/1000 SFP/RJ-45 combo ports

    Protocols

    • CSMA/CD

    Technology

    • Store-and-Forward switching architecture

    MAC Address

    • 8K MAC address table

    Backplane

    • 52 Gbps

    Dimensions

    • Width: 17.4” [442 mm]
    • Depth: 11.8” [300 mm]
    • Height: 1.73” [44 mm]

    Power Input

    • Dual Hot-Swappable Power Supplies; Power Redundancy, Failover: PS-ACDC-1200
    • AC low-line: 100 – 120VAC
    • AC high line: 200 – 277VAC
    • HVDC low-line : 192 – 254VDC
    • HVDC high-line: 306-334VDC

    Power Consumption

    • Maximum Power Consumption without PoE:
    • 79 Watts with dual AC power modules
    • 52 Watts with single AC power module

    Power-over-Ethernet

    • Max 90 Watts output per port
    • AC low-line: 900W (single PS), 1,800W (dual PS)
    • AC high-line: 1,080W (single PS), 2,160W (dual PS)
    • HVDC low-line: 900W (single PS), 1,800W (dual PS)
    • HVDC high-line: 1,080W (single PS), 2,160W (dual PS)

    Environment

    • Operating: 0°C to +40°C
    • Humidity: 10% to 90% (non-condensing)

    Weight

    •  SM24TBT2DPB (single power supply) = 11.3 lbs [5.12 kg]
    • SM24TBT2DPB-2XPS (dual power supplies) = 13.3 lbs [6.03 kg]

    Certifications

    • FCC Class A, CE, UL62368-1

    Warranty

    • Lifetime

SM24TBT2DPB Resources

Application Spotlights
Videos
Press Releases
Case Studies

SM24TBT2DPB Part Numbers

SM24TBT2DPB SM24TBT2DPB

(24) 10/100/1000Base-T ports + (2) 100/1000Base-X SFP/RJ-45 combo ports
(includes 19” rack mount brackets, (1) PS-ACDC-1200 and
no Saf-D adapter cable or power cord - for Digital Electricity*
applications)

SM24TBT2DPB-xx SM24TBT2DPB

(24) 10/100/1000Base-T ports + (2) 100/1000Base-X SFP/RJ-45 combo ports
(includes 19” rack mount brackets, (1) PS-ACDC-1200, (1)
Saf-D adapter cables and *country specific power cord)

SM24TBT2DPB-2XPS SM24TBT2DPB

(24) 10/100/1000Base-T ports + (2) 100/1000Base-X SFP/RJ-45 combo ports
(includes 19” rack mount brackets, (2) PS-ACDC-1200 and
no Saf-D adapter cable or power cords - for Digital Electricity*
applications)

SM24TBT2DPB-2XPS-xx SM24TBT2DPB

(24) 10/100/1000Base-T ports + (2) 100/1000Base-X SFP/RJ-45 combo ports
(includes 19” rack mount brackets, (2) PS-ACDC-1200, (2)
Saf-D adapter cables and *country specific power cords)

Lantronix Part # Name Description Order Now

* Digital Electricity is a trademark of VoltServer. For more information about Digital Electricity, visit voltserver.com. 

Compatible Accessories

Lantronix Part # Legacy Part # Name Description Order Now
PS-ACDC-1200 PS-ACDC-1200 Secondary AC & DC Modular Power Supply for SM24TBT2DPB
SFP Modules SFP Modules See Relevant SFP Modules