xPico 110 : Wired Device Server Module New

Robust Ethernet Networking without Complexity

Connectivity without complexity. Designed for swift integration with minimal engineering effort, the compact xPico® 110 module makes it easy for OEMs to network enable their industrial machines.

xPico 110 Highlights


  • Hardened and completely offloaded TCP/IP stack and network services
  • TruPort® Serial technology for robust and secure data communication
  • Fine-grained security policy configuration
  • Integrated web server
  • NIST certified 256-bit AES encryption
  • Integrated on-module 10/100 Mbps PHY
  • Available Modbus gateway variant
  • Compact SMT footprint (18mm x 31mm)
  • Industrial operating temperature range (-40°C to + 85°C)

Perfect For

  • Access Control & Physical Security
  • Industrial Machines
  • Renewable Energy
  • Building Automation

Marketing asked me to add an RGB LED to the next version of our networked home power monitor. The LED also needed to be controlled remotely over the network.  When I looked at the Lantronix xPico 110 Ethernet networking module it not only allowed me to network enable by power monitor microcontroller, but it also had 16 additional I/O lines available.  I tied 3 I/O lines from the xPico 110 to 3 power MOSFETS to drive the RGB lines to the LED and then wrote some simple code using the Lantronix CoBos CPK to pulse width modulate each line.  Voila!  We now have a remotely controlled, variable color, variable brightness LED for indicating a wide variety of conditions.

Overview for xPico 110

Get From Zero to Connected. Fast.

Time IconConnect to virtually any 8/16/32-bit microcontroller with a UART interface. Simplify your application firmware with a completely offloaded hardened TCP/IP network stack, robust connectivity software and flexible configuration interfaces without writing a single line of code.

Secure Data Communications Support for Hundreds of Protocols

Lock IconSecurely communicate device data with one or more applications on the local network or across the Internet. Customer proven TruPort® Serial technology supports reliable and transparent pass-through of hundreds of standard fieldbus protocols such as Modbus as well as proprietary serial protocols.

Compact & Industrial Design That Fits Virtually Any Board

Hand Wrench IconIntegrate PoE or utilize different Ethernet connector types in your design. On-module PHY and an extended operating temperature range simplifies design integration in the harshest environments.

Features & Specifications for xPico 110

Data Communication

  • TruPort® Serial Technology— TCP and UDP Server Mode, TCP and UDP Client Mode, Multi-host Connect; AES Encrypted Sessions
  • SMTP Alerts—GPIO Triggers; Serial Data Stream Triggers

Security and Authentication

  • NIST Certified AES (FIPS-197) Algorithm
  • 256-bit, 192-bit, 128-bit AES encryption
  • Configuration Password (Telnet, Serial)
  • Software Controlled Network Service Port Enable/Disable

Management Interfaces

  • Serial Port, Telnet, Internal Web Server (HTTP), SNMP
  • Microsoft Windows-based utility for web configuration
  • Lantronix Device Discovery Protocol
  • Firmware upgrade via TFTP and Serial Port

Protocol Support

  • DHCP Client, BOOTP, TFTP
  • Telnet Server, HTTP server
  • IPv4, TCP/IP, UDP/IP, ARP, ICMP, Auto-IP, DNS, SNMP v1

Ethernet Specifications

  • IEEE 802.3 MAC and PHY, 10BaseT and 100BaseT
  • Auto Negotiation; Full duplex and half duplex support

Serial Specifications

  • 2x UART (Serial) Ports
  • CMOS (Asynchronous) 3.3V Level Signals (5V Tolerant)
  • Data Rates: 300 bps to 921 kbps (software selectable)
  • Data Bits: 7 or 8; Stop Bits: 1 or 2; Parity: Odd, Even or None
  • Control signals: DTR/DCD, RTS/CTS (Serial Port 1 only)
  • Flow Control: XON/XOFF (software), RTS/CTS (hardware), None

Other Interfaces

  • Programmable I/O: 16 PIO pins (software selectable)

Architecture

  • CPU: 16-bit x86 DSTni-EX up to 120 MHz
  • Memory: 256 KB SRAM, 512 KB Flash
  • 384 KB for Web Pages

Power

  • Input Voltage: 3.3 VDC
  • Current Consumption: 240 mA typical (100 BaseT; 120MHz CPU)

Dimensions

  • 18.3 mm (W) x 31.1 mm (L) x 3.0 mm (H)

Packaging

  • Tape & Reel: 250 units/reel
  • Sample Pack: 10 units/pack

Environmental

  • Operating Temp: -40°C to +85°C
  • Storage Temp: -40°C to +85°C
  • Relative Humidity: 10% to 90% non-condensing

Certifications

Emissions

  • EN55032:2010 Class B; CFR Title 47, Part 15, Subpart B, Class

Immunity

  • EN 55024:2010; EN 61000-3, EN 61000-4

Safety

  • UL 60950-1, 2nd Ed; CSA C22.2 No. 60950-1-07, 1st Ed
  • IEC 60950-1:2005, 2nd Ed; EN 60950:2006

Warranty

  • 5 Year Limited

Wired Device Server Module

Order Information & Part Numbers for xPico 110

Lantronix Online Store (U.S.A., Canada, Mexico, Europe)rohs_logo
Click on a cart button below to buy direct from Lantronix.

  • Call (800) 422-7055 to speak with a Lantronix sales representative in North America.
  • Lantronix Worldwide Offices – Find an office in your region from our list of worldwide offices.
  • Find a Lantronix Partner – Lantronix products are available from a variety of leading technology vendors.
Part Number Name Description Order Now
SKU
XPC100200B-01 xPico 110

Wired Device Server Module, AES, BULK, T&R 250

Contact Us
XPC100200S-01 xPico 110 Sample Pack

Wired Device Server Module, AES, SAMPLE (10-Pack)

Order Now
XPC10020MB-01 xPico 110 Modbus

Wired Device Server Module, Modbus, BULK, T&R 250

Contact Us
XPC100200K-02 xPico 110 Evaluation Kit

Wired Device Server Module, Evaluation Kit

Order Now

Related Products