|
Home > Products > Device Enablement > External Device Servers > UDS200
External Device Servers
UDS200
P H A S E O U T
Contact Lantronix at 800-422-7055 for availability.
Highlights
- Remotely monitor, manage and control serial devices over Ethernet
- Replace limited-distance point-to-point serial connections
- Two RS-232 serial ports pinned the same as a standard PC
- Configurable with included Windows® software or via built-in web server
- Compact size enables it to fit almost anywhere
Remotely Monitor, Manage and Share Devices
Over a Network or the Internet
The dual-port UDS200 device server enables you to
connect serial devices to IP-based Ethernet networks,
quickly and easily. Powered by DSTni-LX, a powerful
Lantronix device networking chip, the UDS200 replaces
limited distance, point-to-point serial connections.
Our approach to network-enabling devices is
transparent to your attached devices and software.
You won’t need to change the way you work, and
there’s no need to develop special software to take
advantage of Ethernet networking. And with the
UDS200 any piece of equipment with a serial port
can be added to the network in a matter of minutes!
Using a method called serial tunneling, the UDS200
encapsulates serial data into packets and transports
it over Ethernet. Using two UDS200s, connected by
a network, virtual serial connections can be extended
across a facility or around the world. So you can
manage your equipment from virtually anywhere over
a network or the Internet.
The included redirection software extends the
functionality of your COM port-based Windows®
applications. With virtual COM ports, mapped to
remote device servers on the network, you can
replace direct serial connections.
Easy to Set Up and Use
The included Windows-based configuration software
simplifies installation and setup. The UDS200 can also
be set up locally through its serial port, or remotely
over a network using Telnet or a web browser.
The UDS200 includes a built-in web server, which
can be used for configuration and to host usercreated
web pages for accessing and controlling the
connected equipment.
Flash memory provides maintenance-free nonvolatile
storage of web pages, and allows future
system software upgrades.
Modem Replacement
In modem emulation mode, the UDS200 is used to
replace dial-up modems. The unit accepts modem
AT commands on the serial port, then establishes a
network connection to the end device, leveraging
network connections and bandwidth to eliminate
dedicated modems and phone lines.
If you’re looking for a transparent, cost-effective, and
scalable means to network-enable your serial devices,
look no further than the UDS200.
 top
of page
|
Features / Specifications
| Serial Interface |
| Interface |
RS-232 |
| Connectors |
2 DB9 (male, DTE configuration) |
| Data Rates |
300 to 115,200 bps |
| Characters |
7 or 8 data bits |
| Parity |
odd, even, none |
| Stop Bits |
1 or 2 |
| Control Signals |
RTS, CTS, DSR, DTR, DCD |
| Flow Control |
XON/XOFF, RTS/CTS |
| Network Interface |
| Interface |
Ethernet 10Base-T/100Base-TX |
| Connector |
RJ45 |
| Standards |
ARP, UDP/IP, TCP/IP, ICMP, SNMP, AutoIP, DHCP, TFTP, Telnet and HTTP |
| Indicators (LED) |
- Power, 10 Link/activity (green)
- 100 Link/activity(green)
- Diagnostics (red)
- Status
channel 1 (green)
- Status channel 2 (red)
|
| Processor |
| CPU |
DSTni-LX (enhanced 80186, 48 MHz) |
| Memory |
256 Kbytes SRAM, 1MB flash |
| Management |
| Lantronix DeviceInstaller™ GUI, Serial login, SNMP, Telnet login, HTTP |
| Internal Web Server |
| Provides static web pages |
| Storage capacity |
896 KBytes |
| Power |
| Input |
9 to 30 VDC,
9 to 24 VAC |
| Consumption |
2 W maximum |
| AC adapter included (see Ordering Information below) |
| Environmental |
| Operating |
5° to 50°C (41° to 122°F) |
| Storage |
-40° to 66°C (-40° to 151°F) |
| Packaging |
| Material |
Metal case with flange mount |
| Dimensions (LxWxH) |
9.5 x 7.2 x 2.3 cm
(3.7 x 2.8 x 0.9 in) |
| Weight |
0.4 kg (0.9 lbs) |
| Agency Approvals |
| FCC-B, C/UL, CSA, CE,TUV |
| Shipping Dimensions |
| Dimensions |
11.5 x 24.2 x 19.1 cm
(4.5 x 9.5 x 7.5 in) |
| Weight |
1.5 kg (3.0 lbs) |
| Included Software |
| Windows® 98/ME/NT/2000/XP-based configuration software, Com Port Redirector™ software, and related utilities |
top
of page
|
Ordering Information
Lantronix products are available from a wide variety of leading technology vendors.
Click here to use our Partner Locator.
To speak with a Lantronix sales representative in North America, call +1 (800) 422-7055.
For a full listing of Lantronix worldwide offices, please see our Contact Information page.
| Part Number |
Description |
| UDS200-01 |
115 VAC, 50/60 Hz adapter
Device server: 2 DB9 RS232 DTE serial ports, 10Base-T/100Base-TX Ethernet, diagnostic LEDs, AC power adapter,
CD-ROM with configuration tools and documentation, printed Quick Start Guide |
| UDS200-02 |
100-240 VAC, 50/60 Hz Intl. adapter
Device server: 2 DB9 RS232 DTE serial ports, 10Base-T/100Base-TX Ethernet, diagnostic LEDs, AC power adapter,
CD-ROM with configuration tools and documentation, printed Quick Start Guide |
|
top of
page
|
