Products - Device Enablement
Home > Products > Device Enablement > Embedded Device Servers > Mini

Resources

Embedded Device Servers

Mini

Mini

Highlights

  • 10/100BASE-T Ethernet network interface
  • Encryption for higher security required for certain critical application devices
Overview Features/Specifications Ordering

The Lantronix Mini enables you to add network connectivity to your products quickly and economically. Dramatically shorten your time to market by embedding Lantronix's proven network-enabling technology today instead of spending time and money on a lengthy internal development process. The Mini brings more than a decade of networking experience, rock-solid IP firmware and extensive applications support and expertise to your products.

Measuring a mere 7.0 cm x 8.0 cm, the Mini can be easily designed into products that would benefit from network connectivity. Serial interfacing is accomplished via a TTL connector which includes serial transmit, receive and DTR lines. For Ethernet applications, 10BASE-T or AUI interfaces can be specified. Both the length and orientation of it's interface pins can be specified to fit your product's architectural requirements. The Mini requires only five volts of regulated power for normal operation.

Lantronix's well-developed IP firmware supports such features as DHCP, TFTP, TCP/IP, UDP, SNMP and Telnet. Support for custom protocols is available. The Mini also supports a variety of user-configurable options such as buffer control and packetization size, which make it easy to use in most any application.

In addition, Lantronix's Com Port Redirector™ utility makes it possible to run existing applications on networked PCs that were previously limited to direct serial connections. This application transparency eliminates the need to develop costly new networked applications software.

back to toptop of page

Features / Specifications

 
Supported Protocols ARP, UDP, TCP, Telnet, SNMP, ICMP, SNMP, DHCP, and TFTP
Compatibility Ethernet: Version 2.0/IEEE 802.3
Network Interface Ethernet: RJ45 (10Base-T) or AUI (transformer and resistors/capacitors required)
Serial Interface 2 TTL serial interfaces
Reset line
RxD/TxD
RTS/CTS/DCD
DTR line (for disconnect)
Three status lines (for LEDs)
Data Rates 300 bps to 115.2 Kbps
Serial Line Formats Characters: 7 or 8 data bits
Stop bits: 1 or 2
Parity: odd, even, none
Modem Controls DTR (TTL level)
Flow Control XON/XOFF
CTS/RTS
None
Management Internal web server
SNMP (read only)
Serial login
Telnet login
System Software Flash ROM standard: new software can be downloaded from a TCP/IP host (TFTP) or over serial port
Diagnostic LEDs Tx/Rx data
Good link
Status
Diagnostics
Power Requirements 5V regulated
250mA (Ethernet model)
Environmental Operating Temperature: 5 to 50°C (41 to 122°F)
Storage Temperature: -40 to 66 °C (-40 to 151°F)
Physical Dimensions 7.0cm x 8.0cm x 1.0cm (2.76 in x 3.15 in x 0.4 in)
Click for Board Layout Dimensions

back to toptop of page

Ordering Information

Lantronix products are available from a wide variety of leading technology vendors.
Click here to use our Partner Locator.

To speak with a Lantronix sales representative in North America, call +1 (800) 526-8764. For a full listing of Lantronix worldwide offices, please see our Contact Information page.

Part Number Description
CM-E2-0000B Board-only device server

back to toptop of page