Point System Online Help
- Introduction to SNMP
- Configuration Management
- Redundant Management
- Traps
- Point System Slide-In Devices:
- CAPTF100 Analog Telephone 2 Wire to Fiber
- CBFTF100 10/100Mbps Ethernet Switch
- CBFTF150 2-port 10/100Mbps Ethernet Switch
- CCSCF100 DS-3/E3 Coax to Fiber
- CDFTF100 Telco Ethernet Twisted Pair to Fiber
- CEMTF100 E&M 2/4 Wire to Fiber
- CETCT100 10Mbps Ethernet Twisted Pair to Coax
- CETTF100 10Mbps Ethernet Twisted Pair to Fiber
- CFETF100 Fast Ethernet Twisted Pair to Fiber
- CFETF105 Fast Ethernet Twisted Pair to Fiber (economy)
- CFETF205 Fast Ethernet Twisted Pair to Fiber
- CFMFF100 Singlemode to Multimode Fiber
- CGETF100 Gigabit Ethernet Twisted Pair to Fiber
- CGFEB100 10/100/1000Mbps Twisted Pair to 1000Mbps Fiber converter
- CPSLD100 Power Supply Indicator Card
- CPSMM100 Base Management Module
- CPSMM200 Expansion Management Module
- CPSMP100 Instant Fail-Over Power Supply
- CPSMP110 Multiple Instant Fail-Over Power Supply Controller
- CPSVT100 High-Speed Serial Copper to Fiber
- CRMFE100 Fast Ethernet Twisted Pair to Fiber with Bandwidth Allocation and Remote Management
- CRS2F100 RS-232 to Fiber
- CRS4F100 RS-485 to Fiber
- CSDTF100 T1/E1 Twisted Pair to Fiber
- CSETF100 10/100Mbps Ethernet Twisted Pair to Fiber
- SMACF100 Management Aggregation Converter
Note for CPSMMxxx Web Management users: The default location for this online documentation is https://transition.com/pshelp/. By leaving this setting at its default value, you are assured of always viewing the most current documentation.
However, since some customers have connectivity or security concerns that make Internet access impossible, each Focal Point CD contains a snapshot set of these files, which can be placed on an intranet server or even the local hard drive of the Network Management System. To cause the Web server in the Point System Agent to look for help files in a non-default location, use the Command Line Interface command WEBHELP=.
Users of the Focal Point application need not worry about the location of help files, since they are always installed as a part of the application.