On the Air in 30 minutes or Less
Getting a system set up quickly can be a hassle, especially if you are looking to add wireless 802.11 connectivity to your product. With the right tools, you can get this done and be up and running in under 30 minutes. One of the quickest ways to do this is with the Lantronix WiBox. With minimal setup (often just a few minutes), it will bridge your serial or wired Ethernet data to Wi-Fi.
Apply Power
Connect to your device via serial or Ethernet, configure communications parameters, if needed
Configure SSID and security parameters to talk to your wireless network
Voilà!
The WiBox is licensed for use in most countries and requires no other licensing to use. It comes with a 2.1db gain antenna, and depending on country specific maximums, can be used with higher gain antennas for increased range.
For more information on this versatile product: https://www.lantronix.com/device-networking/external-device-servers/wibox.html
Related Posts
June 21, 2022 Archive
Our Open-Q 5165RB SOM and G520 Gateway in Action
Vision Intelligence At Embedded World 2022, we are displaying the Open-Q 5165RB development board powered by Q.....
March 29, 2022 Archive
Net2Edge’s New Home
Welcome to the new home of Net2Edge.com. We are pleased to be joining our friends and colleagues from Transiti.....