NM2-GXE-01 Series

M.2 Gigabit Ethernet Fiber Network Interface Card for Dell OptiPlex™ 7040/7050 & Wyse 7040/7050
1000Base-SX/X

Lantronix M.2 Gigabit Ethernet Fiber Network Interface Card (NIC) provides a fiber optic interface for the Dell OptiPlex™ 7040 and 7050 Micro PCs and the Wyse 7040/7050 Series thin clients. The NM2-GXE-2230-xx-01 Series consists of a M.2 NIC that installs into the OptiPlex Micro PC’s M.2 “A or E keyed” interface, a fiber optic adapter that installs into the OptiPlex Micro PC’s Option port, and a 20-pin Flat Flex Cable (FFC) that connects the NIC to the fiber adapter. The fiber optic adapter is available with either a 1000Base-SX LC optic or open SFP (SFP module sold separately).

NM2-GXE-01 Series Overview

Features

PCI Express M.2 compliant
A + E keyed M.2 interface
Full duplex
Flow control
Wake on LAN (WOL)
Smart Load Balancing (SLB)
TCP Segmentation Offload (TSO)
Message Signaled Interrupts (MSI)
Extended Message-Signaled Interrupts (MSI-X)
LACP support (Teaming)
IPv6 Capable
Supports UEFI
Supports PXE boot
Jumbo frame support 9014 bytes
1000Base-SX multimode LC fiber connector or open SFP interface

NM2-GXE-01 Series Tech Specs

Standards

IEEE 802.3-2012

Bus Slot

M.2 – ‘2230-D4-A-E’

Data Rate

1000 Mbps (full duplex only)

Max Frame Size

9014 bytes

Status LEDs

LINK/ACT
ON = Link
Flashing = Activity

Dimensions

M.2 NIC
- 2230-D4-A-E
- Width: 0.87” [22 mm]
- Depth: 1.18” [30 mm]
- Height: 0.12” [3.08 mm]
Fiber Interface)
- Width: 1.65” [42 mm]
- Depth: 2.05” [52 mm]
- Height: 0.51” [13 mm]
FFC Cable
- Length: 2.99” [76 mm]

Software Support

Windows 10, 8, 8.1, and 7 (32/64 bit); Linux

Power Consumption

LC: 250mA @ 3.3V (0.8 Watts typical)
SFP: 120mA @ 3.3V (0.4 Watts typical without SFP module)

Power Source

M.2 interface connector: 3.3V (Refer to table 41 of M.2 Specification)

Environment

Operating: 0°C to +45°C
Storage: -40°C to 85°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.

Weight

0.1 lbs. [0.05 kg]

Certifications

CE Mark; Emissions: EN55032, FCC Part 15 Class A; Immunity: EN55024

Warranty

Lifetime

Warranty

Lifetime

NM2-GXE-01 Series Downloads

Product Brief

NM2-GXE-01 Series Product Brief

416 KB

View

M.2 Ethernet Fiber Network Interface Card Overview

550 KB

View

Additional Product Information

Note: Some Documentation may have Transition Networks named or pictured. Transition Networks was acquired by Lantronix in August 2021. Learn more about the acquisition here.

Drivers

NM2-GXE-01 Series Linux Preboot (ZIP 10.72 MB)

11 MB

View

NM2-GXE-01 Series Linux Proadmin (ZIP 5.57 MB)

11 MB

View

NM2 Windows 8 – 64bit Driver (ZIP 72.17 MB)

72 MB

View

NM2 Windows 8 – 32bit Driver (ZIP 51.67 MB)

52 MB

View

NM2 Windows 7 – 64bit Driver (ZIP 54.46 MB)

54 MB

View

NM2 Windows 7 – 32bit Driver (ZIP 43.68 MB)

44 MB

View

NM2 Windows 10 – 64bit Driver (ZIP 72.17 MB)

72 MB

View

NM2 Windows 10 – 32bit Driver (ZIP 51.67 MB)

52 MB

View

Solution Brief

Fiber-to-the-Desk Application Note

434 KB

View

User Guides

NM2-GXE-01 Series Installation Guide Rev D

1 MB

View

NM2-GXE-01 Series Part Numbers

Lantronix Part #	Name	Description	Order Now
Sorry, no parts were found that match that search query.

NM2-GXE-2230-LC-01	NM2-GXE-01 Series	For Dell OptiPlex™ 7040/7050 & Wyse 7040/7050: 1000Base-SX 850nm multimode (LC) [62.5/125 μm fiber: 220 m/722 ft.] [50/125 μm fiber: 550 m/1804 ft.] Link Budget: 8.0 dB	Contact Us
NM2-GXE-2230-SFP-01	NM2-GXE-01 Series	For Dell OptiPlex™ 7040/7050 & Wyse 7040/7050: 1000Base-X Open SFP Slot	Contact Us
Compatible Accessories
SFP Modules	SFP Modules		Contact Us