NTC-100 Series

NTC-100 Series Tech Specs

• UE CATEGORY

  • Cat M1/NB1
  • 3GPP E-UTRA Release 13

• CELLULAR BANDS

  • LTE-FDD
    • Band 1 (2100 MHz)
    • Band 2 (1900 MHz)
    • Band 3 (1800 MHz)
    • Band 4 (1700 MHz)
    • Band 5 (850 MHz)
    • Band 8 (900 MHz)
    • Band 12 (700 MHz)
    • Band 13 (700 MHz)
    • Band 18 (850 MHz)
    • Band 19 (850 MHz)
    • Band 20 (800 MHz)
    • Band 28 (700 MHz)
  • LTE-TDD
    • Band 39 (1900 MHz, Cat. M1 only)
  • EGPRS
    • 850 MHz
    • 900 MHz
    • 1800 MHz
    • 1900 MHz

• PEAK DATA SPEED

  • Cat M1
    • 375 Kbps / 375 Kbps (Downlink / Uplink)
  • Cat NB1
    • 32 Kbps / 70 Kbps (Downlink / Uplink)
  • GPRS
    • 107 Kbps / 85.6 Kbps (Downlink / Uplink)
  • EDGE
    • 296 Kbps / 236.8 Kbps (Downlink / Uplink)

• ANTENNA CONNECTORS

  • 1 x SMA Connector

• INTERFACES

  • 1 x SIM card slot (2FF)
  • 1 x USB 2.0 (Device only)
    • Micro-B receptacle
  • 1 x 10-pin NANO-fit (locking) connector providing Serial interface (RS-232 / RS-422 / RS-485)
    • 15kV RMS Protection

• LED INDICATORS

  • 2 x Tri-color (Red/Amber/Green) LEDs indicating
    • Power
    • Network

• RESET BUTTON

  • Recessed reset button with two functions
    • Reboot
    • Reset unit to factory defaults

• MODES OF OPERATION

  • PPP
  • IP
  • Advanced diagnostics and control via SMS
    • Query status information - such as Signal Strength, WAN IP, uptime, and many more
    • Configure device remotely via SMS such as APN, authentication settings, and many more
    • Execute commands via SMS - such as reboot, reset to defaults, go offline, and many more
    • Secure SMS management using sender whitelisting and password protection
    • SMS acknowledgement replies for queries and commands

• CELLULAR CONNECTION MANAGEMENT

  • Profile managed packet data connections
  • SIM PIN protection
  • Automatic and manual cellular band selection
  • Automatic and manual operator selection

• FIRMWARE MANAGEMENT

  • Firmware upgrade locally via USB or remotely Over-The-Air
  • Triggered firmware upgrade via SMS (initiate download & install from FTP)

• POWER SUPPLY

  • Power input via 10-pin NANO-fit connector
  • DC Power input (4.5 – 36 V DC)

• POWER CONSUMPTION

  • Idle power consumption: 0.24W (measured under ideal conditions)
  • Full load power consumption: 2W

• TEMPERATURE & HUMIDITY

  • Operating temperature range: -30°C to +70°C
  • Storage temperature range: -40°C to +85°C
  • Non-condensing humidity: 5-95% RH @ 60°C

• DIMENSIONS & WEIGHT

  • Device dimensions (excluding external antenna): 84 mm (L) x 50 mm (W) x 21 mm (D)
  • Device weight: 55 g (approx.)

• MOUNTING OPTIONS

  • Wall mountable via mounting holes
  • DIN Rail mount support via included plastic bracket (Top hat section rail TH 35 IEC60715)

• ENCLOSURE

  • IP40 rated

• CERTIFICATIONS

  • Approvals: RCM / CE / IC / FCC / GCF / PTCRB
  • Carrier approval: Telstra (NTC-100-01), AT&T (NTC-100-02)
  • Environmental: RoHS2 / REACH / WEEE

Warranty

• 1 Year