LIB-225 Series Discontinued

Gigabit Ethernet NID
(1) Serial Port + (1) TDM Port + (3) 10/100/1000Base-T RJ-45 Ports + (2) 100/1000Base-X SFP Slots

LIB-225-Series
LIB-225 Series

LIB-225 Series Discontinued

Related Products

LIB-225 Series Overview

Features

  • Multi-standard TDM pseudowire support: CESoPSN, SATOP, TDM over IP
  • Highly accurate & stable clock recovery exceeding G.823/G.824
  • Fan-less design
  • Optional MPLS-TP support
  • IPv6 & IPv4 support
  • VLAN (802.1Q) Q-in-Q (C-Tag / S-Tag)
  • RMON & Syslog
  • OAM Support: IEEE 802.3ah Link OAM, IEEE 802.1ag Service OAM & ITU-T Y.1731 Performance Monitoring
  • RFC-2544 & ITU-T Y.1564 Traffic Generation & Reports
  • IEEE 1588v2 (ptp)
  • Protection: ITU-T G.8032/G.8031 IEEE RSTP, MSTP, LACP, Logical Link Forwarding
  • RFC-5086 – Structure-Aware Time Division Multiplexed (TDM) Circuit Emulation Service over Packet Switched Network (CESoPSN).
  • RFC-4553 – Structure-Agnostic Time Division Multiplexing (TDM) over Packet (SAToP)
  • Optional Sync-E capability
  • Zero Touch Configuration Capability
  • Zero Touch Provisioning
  • Jumbo Frame Support (10K)
  • Wire speed loopbacks

 

Software Features

  • MEF 2.0 E-LINE (EPL & EVPL) E-LAN (EP-LAN & EVP-LAN) E-ACCESS (ACCESS EPL & EVPL)
  • UNI or NNI configuration
  • TOS/Diffserv
  • Quality of Service (IEEE 802.1p): 8 queues; strict priority & WRR, shaping, policing, P-bit & DSCP
  • Management via CLI, Web, SSH/SSL & SNMP (v1, v2c & v3) via any Ethernet or USB port
  • Port configuration, status, statistics & monitoring
  • RADIUS, TACACS+ & ACL
  • Remote backup / restore configuration
  • Remote firmware upgrades
  • Alarms via Syslog & SNMP
  • Remote loopbacks
  • L2CP
  • LLDP
  • LLF
  • Link Aggregation Control Protocol (LACP)
  • Dying/Last Gasp
  • Port Mirroring
  • IGMP Snooping
  • Optional BERT test set functionality via software update

LIB-225 Series Tech Specs

      Standards

      • IEEE 802.3
      • IEEE 802.3u
      • IEEE 802.3z
      • IEEE 802.3ab
      • IEEE 802.3x
      • IEEE 802.3ad
      • IEEE 802.1p
      • IEEE 802.1Q
      • IEEE 802.1w
      • IEEE 802.1s
      • IEEE 802.1x
      • IEEE 802.1AB
      • IEEE 802.3ah
      • IEEE 802.1ag
      • RFC 2544 / ITU-T Y.1564
      • ITU-T Y.1731
      • ITU-T G.8032/G.8031
      • RFC-4553
      • IEEE 1588-2008 (v2) (ptp)
      • RFC-5086
      • ITU-T G.703/G.704
      • ITU-T G.823/G.824

      Ports

      • (3) 10/100/1000Mbps Base-T ports
      • (2) 100/1000Mbps or SGMII SFP slots
      • (1) RS530 / RS232 Serial port
      • (1) USB / RJ-45 Console Management port
      • (1) T1/E1 TDM port
      • E1: 120 Ohm (75 Ohm via cable), ITU G.703 / ITU G.704, CRC4 / non-CRC4,HDB3
      • T1: 100 Ohm, 1.544 Mbps unframed, 1.536 Mbps framed CCS, ESF or DS4 Selectable, B8ZS or AMI selectable

      Advanced Timing

      • Oscillator hold-over 24hrs 4ppb (typical) Temperature stability 14ppb (over normal temperature operating range)

      Dimensions

      • Width: 7.48″ [190 mm]
      • Depth: 8.54” [217 mm]
      • Height: 1.71” [43.5 mm]

      Power Input

      • AC: 100-240 VAC; 50-63Hz Auto-sensing DC: -19 to -57VDC

      Power Consumption

      • 15 Watts (max)

      Weight

      • 2.2 lbs. [1 kg]

      Certifications

      • CE

      Warranty

      • 1 Year

    LIB-225 Series Resources

    Application Spotlights
    Videos
    Press Releases
    Case Studies

    LIB-225 Series Downloads

    Note: Some Documentation may have Transition Networks named or pictured. Transition Networks was acquired by Lantronix in August 2021. Learn more about the acquisition here.

    LIB-225 Series Part Numbers

    LIB-225-AC LIB-225 Series

    (1) Serial port + (1) T1/E1 TDM port + (3) 10/100/1000Base-T ports + (2) 100/1000Base-X SFP slots (empty) with AC Power Supply

    LIB-225-DC LIB-225 Series

    (1) Serial port + (1) T1/E1 TDM port + (3) 10/100/1000Base-T ports + (2) 100/1000Base-X SFP slots (empty) with DC Power Supply

    Lantronix Part # Name Description Order Now

    Compatible Accessories

    Lantronix Part # Legacy Part # Name Description Order Now
    CE-225-BERT-SW CE-225-BERT-SW Software update to enable BERT testing capability
    CE-225-N-MPLS-TP-SW CE-225-N-MPLS-TP-SW Software update to enable MPLS-TP capability
    SERIAL-V35-DCE SERIAL-V35-DCE Smart serial to V.35 DTE
    SERIAL-RS530-DTE SERIAL-RS530-DTE Smart serial to RS530 DTE
    SERIAL-RS232-DCE SERIAL-RS232-DCE Smart serial to RS232 DCE
    SERIAL-RS232-DTE SERIAL-RS232-DTE Smart serial to RS232 DTE
    SERIAL-RS530-DCE SERIAL-RS530-DCE Smart serial to RS530 DTE
    SERIAL-X21-DCE SERIAL-X21-DCE Smart serial to X.21/V.11 DTE
    SERIAL-X21-DTE SERIAL-X21-DTE Smart serial to X.21/V.11 DTE
    SERIAL-V35-DTE SERIAL-V35-DTE Smart serial to V.35 DTE
    SFP Modules SFP Modules See Relevant SFP Modules